Skip to main content

Remove the system fan cage

Use this information to remove the system fan cage.

About this task

Attention

  • Read Installation Guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

  1. Prepare your server.

    1. Power off the server.

    2. Remove the top cover. See Remove the top cover.

    3. Record and disconnect any cables. See Internal cable routing.

    4. Remove any components that are impeding the procedure.

    5. Install any components that are required before installing or removing the component(s).

  2. Remove the system fan cage.
    Figure 1. System fan cage removal
    System fan cage removal

    1. Rotate the levers of the system fan cage to the rear of the server.
    2. Lift the system fan cage straight up and out of the chassis.

Demo video

Watch the procedure on YouTube