Skip to main content

Install the serial port module

Follow instructions in this section to install the serial port module.

About this task

Attention

Procedure

  1. Open the retention latch on the PCIe riser.
  2. Install the serial port module.
    1. Insert the serial port module into the PCIe riser.
    2. Fasten the screw to secure the serial port module to the PCIe riser.
    3. Close the retention latch.
    4. Route the serial port cable through the cable clip.
      Figure 1. Installing the serial port module
      Installing the serial port module

After you finish

  1. Connect the serial port cable to the serial port cable connector on the system board. See System-board connectors for more details.

  2. Reinstall the PCIe riser. See Install a PCIe riser.

  3. Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube