Skip to main content

Disassemble the system shuttle

Follow the instructions in this section to disassemble the system shuttle before recycling.

About this task

Refer to local environmental, waste or disposal regulations to ensure compliance.

Procedure

  1. Pull the system shuttle out of the chassis, and place it onto the lift platform. See Remove the system shuttle.
  2. Remove all the 2.5-inch hot-swap drives and the drive bay fillers (if any) from the drive bays. See Remove a 2.5-inch hot-swap drive.
  3. Remove the FIO/PCI cage. See Remove the FIO/PCI cage.
  4. Remove the drive cage. See Remove the drive cage.
  5. Remove the PCIe switch shuttle. See Remove the PCIe switch shuttle.
  6. Remove the compute tray. See Remove the compute tray.
  7. Remove the cable holder frame and baffle assembly. See Remove the cable holder frame and baffle assembly.
  8. Remove the power complex. See Remove the power complex.
  9. Remove all the GPU air ducts. See Remove a GPU air duct.
  10. Remove the GPU complex. See Remove the GPU complex.
  11. Remove the GPU complex adapter plate. See Remove the GPU complex adapter plate.

After you finish

After disassembling the system shuttle, recycle the unit in compliance with local regulations.