Disassemble the system board for recycle

Follow the instructions in this section to disassemble the system board before recycling.

Procedure

1. Remove the following components.
   1. Pull the system shuttle out of the chassis, and place it onto the lift platform. See Remove the system shuttle.
   2. Remove the compute tray. See Remove the compute tray.
   3. Remove the middle cable guide from the system board. See Remove a cable guide.
   4. Remove all the processors and the heat sinks. See Remove a processor and heat sink.
   5. Remove the CMOS battery (CR2032). See Remove the CMOS battery (CR2032).
   6. Remove the memory modules. See Remove a memory module.
2. Remove the system board.
   1. Loosen the twelve screws securing the system board.
   2. Lift the system board out of the tray.
      Figure 1. System board removal