Skip to main content

Install the 2U compute shuttle

Follow instructions in this section to install the 2U compute shuttle. The procedure must be executed by a trained technician.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • The 2U compute shuttle is accessible only from the rear of the server.
  • Make sure that all cables, adapters, and other components are installed and seated correctly and that you have not left loose tools or parts inside the server.
  • Make sure that all internal cables are correctly routed. See Internal cable routing.

Procedure

  1. Fully open the two release levers; then, align the 2U compute shuttle with its opening in the rear of the chassis, and push it into the chassis until it stops.
  2. Rotate the two release levers until they lock into place.
    Figure 1. 2U compute shuttle installation
    2U compute shuttle installation

After you finish

Complete the parts replacement. See Complete the parts replacement.