Skip to main content

Install the OCP module

Follow instructions in this section to install the OCP module.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

  1. If the OCP is covered with a OCP filler, remove it.
  2. Install the OCP module.
    1. Slide the OCP module into the slot until it is fully seated.
    2. Tighten the thumbscrew to secure the OCP module. Use a screwdriver if necessary.
    Figure 1. OCP module installation
    OCP module installation

After you finish

Complete the parts replacement. See Complete the parts replacement.