Skip to main content

Memory sparing mode

In memory-sparing mode, one memory rank serves as a spare for other ranks on the same channel in case they fail. The spare rank is held in reserve and not used as active memory until a failure is indicated, with reserved capacity subtracted from the total available memory in the system.The DIMM installation order for memory sparing varies based on the number of processors and memory modules installed in the server.

After an error threshold is surpassed in a system protected by memory sparing, the content of a failing rank of DIMMs is copied to the spare rank. The failing rank is then taken offline and the spare rank placed online for use as active memory in place of the failed rank. Since the failover process involves copying of memory content, the level of memory redundancy provided by memory sparing is less than that provided by memory mirroring: memory mirroring is the preferred failure-protection choice for critical applications.

Figure 1. Processor and memory module layout: processor 1 and 2

Table 1. Processor and memory module layout: processor 1 and 2
1 DIMM 1-64 DIMM 7-18
2 DIMM 19-245 Processor 1
3 Processor 2 
Figure 2. Processor and memory module layout: processor 3 and 4

Table 2. Processor and memory module layout: processor 3 and 4
1 Processor 34 DIMM 43-48
2 DIMM 31-425 DIMM 25-30
3 Processor 4 
Table 3. Channel and slot information of DIMMs around a processor
ChannelChannel 2Channel 1Channel 0Channel 0Channel 1Channel 2
DIMM number (Processor 1)123456789101112
DIMM number (Processor 2)131415161718192021222324
DIMM number (Processor 3)252627282930313233343536
DIMM number (Processor 4)373839404142434445464748
Memory sparing guidelines:
  • The spare rank must have identical or larger memory capacity than all of the other active memory ranks on the same channel.

  • If installing DIMMs that are one rank, follow the population sequences listed below.

  • If installing DIMMs with more than one rank, follow population sequences specified for independent memory mode. See Independent memory mode.

The memory sparing DIMM population sequences for each supported processor configuration are:

This mode only applies to single-rank memory modules. When installing DIMMs consisting of more than two ranks, including dual-rank, quad-rank or octal-rank memory modules, refer to Independent memory mode instead.