Remove the TCM/TPM adapter (for Chinese Mainland only)
Use this information to remove the TCM/TPM adapter.
Before removing the TCM/TPM adapter:
Turn off the server and peripheral devices and disconnect the power cords and all external cables (see Power off the server).
If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover, or remove the server from the rack.
Remove the top cover (see Remove the top cover).
- Disconnect the USB 3.0 cable of operator panel tray assembly, and remove it vertically from the system board.Figure 1. Removing USB 3.0 connector vertically
To remove the TCM/TPM adapter, complete the following steps:
- Locate the TCM/TPM connector on the system board (see System-board connectors).
- Press and hold the release latch, and then lift the TCM/TPM adapter straight up. Note
Figure 2. TCM/TPM adapter removal
Carefully handle the TCM/TPM adapter by its edges.
Your TCM/TPM adapter might look slightly different from the illustration.
If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.