Skip to main content

Remove a 7mm drive

Follow instructions in this section to remove a 7mm drive.

About this task

Attention

Procedure

  1. Gently rotate the release latch away to unlock the drive handle.
    Figure 1. Removing 7mm drives

  2. Grasp and pull the handle to remove the drive from the drive bay.

After this task is completed

  • Install a replacement unit or a filler (see Install a 7mm drive).
    Figure 2. Installing 7mm drive fillers

  • If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo video

Watch the procedure on YouTube