Technical specifications
Summary of the technical specifications of server. Depending on the model, some features might not be available, or some specifications might not apply.
| Processor |
|---|
Supports eight Intel Xeon processors up to 350W TDP, with integrated memory controller and Intel Mesh UPI (Ultra Path Interconnect) topology.
For a list of supported processors, see: Lenovo ServerProven website. |
| Memory |
|---|
See Memory module installation rules and order for detailed information about memory configuration and setup.
For a list of supported memory modules, see Lenovo ServerProven website. |
| Internal drives |
|---|
The server supports up to two internal 960 GB NVMe M.2 drives with 80 mm (2280) form factor. For a list of supported M.2 drives, see: Lenovo ServerProven website. |
| Storage expansion |
|---|
| Up to sixteen 2.5-inch or E3.S drives For a list of supported drives, see: Lenovo ServerProven website. |
| Expansion slots |
|---|
Note PCIe slot availability is based on riser card selection. |
| Integrated functions and I/O connectors |
|---|
|
| Network |
|---|
Two or four Ethernet connectors on OCP module (optional) |
| RAID adapter |
|---|
Onboard NVMe ports with software RAID support (Intel VROC NVMe RAID)
RAID 0, 1, 10, 5, 50, 6, 60
For more information about the RAID/HBA adapters, see Lenovo ThinkSystem RAID Adapter and HBA Reference. |
| Host bus adapter |
|---|
For more information about the RAID/HBA adapters, see Lenovo ThinkSystem RAID Adapter and HBA Reference. |
| System fan |
|---|
Twelve fans (two fans in each fan module) Note The server supports N+2 redundancy and can operate at its maximum power configuration without performance degradation with two failed fan rotors. |
| Electrical input |
|---|
The server supports eight or twelve 1800W 230V Titanium Hot-Swap Gen2 power supplies with N+N redundancy. |
| Minimal configuration for debugging |
|---|
|
| Operating systems |
|---|
Supported and certified operating systems:
References:
|