Optical/tape drives cable routing

Use this section to understand the cable routing for server models with optical/tape drives.

Note

• Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
• When routing the cables, ensure that all cables are routed appropriately through the cable guides.

Figure 1. Cable routing for optical/tape drives

From	To: System board	Cable
1 ODD/Tape drive power connectors	1a 1b ODD/tape drive power connector	2x2 pin to 15pin/15pin (200 + 100 mm)
2 Lower ODD/Tape drive SATA connector	SATA 6	600/50 mm
3 Upper ODD/Tape drive SATA connector	SATA 7