Skip to main content

RAID configuration

Using a Redundant Array of Independent Disks (RAID) to store data remains one of the most common and cost-efficient methods to increase server's storage performance, availability, and capacity.

RAID increases performance by allowing multiple drives to process I/O requests simultaneously. RAID can also prevent data loss in case of a drive failure by reconstructing (or rebuilding) the missing data from the failed drive using the data from the remaining drives.

RAID array (also known as RAID drive group) is a group of multiple physical drives that uses a certain common method to distribute data across the drives. A virtual drive (also known as virtual disk or logical drive) is a partition in the drive group that is made up of contiguous data segments on the drives. Virtual drive is presented up to the host operating system as a physical disk that can be partitioned to create OS logical drives or volumes.

An introduction to RAID is available at the following Lenovo Press website:

Lenovo RAID Introduction

Detailed information about RAID management tools and resources is available at the following Lenovo Press website:

Lenovo RAID Management Tools and Resources

AMD RAIDXpert2

Enabling AMD RAIDXpert2
Before setting up RAID for SATA drives, follow the below steps to enable AMD RAIDXpert2:
  1. Restart the system. Before the operating system starts up, press F1 to enter the Setup Utility.

  2. Go to Devices > ATA Drive setup > SATA Mode, and select RAID.

  3. Save the changes and reboot the system.

AMD RAIDXpert2 configurations
AMD offers various RAIDXpert2 configurations with different RAID levels and SSD support. See the following for more details.
Note
Supported RAID levels vary by model. For the RAID levels supported by ST45 V3, see Technical specifications.
AMD RAIDXpert2 configurations for SATARequirements
AMD RAIDXpert2
  • Supports RAID levels 0 and 1.