Cable routing for the RAID adapter and drives
Read this section to learn about cable routing for the RAID adapter and drives.
Cable routing for two drives with the RAID adapter
Figure 1. Mini SAS HD to 4 SATA 7-pin cable
| 1 Connector for the X30 series RAID adapter (connector C0) | 2 Connectors for the drives |
Figure 2. Slimline HD to 4 SATA 7-pin cable
The break lines indicate that part of the cable is hidden in the illustration.
| 1 Connector for the X40 series RAID adapter | 2 Connectors for the drives |
Note
The RAID adapter can be installed in PCIe slot 1 or 3.
Make sure the signal cable go through the cable clip.
Figure 3. Cable routing for two drives with the RAID adapter
1 One of the following cable
| 2 Micro-fit to two 1X15P Y-splitter power cable, 450 mm |
Cable routing for three drives with the RAID adapter
Figure 4. Cable routing for three drives with the RAID adapter
1 One of the following cable
| 2 3 Micro-fit to two 1X15P Y-splitter power cable, 450 mm |
Cable routing for four drives with the RAID adapter
Figure 5. Cable routing for four drives with the RAID adapter
1 One of the following cable
| 2 3 Micro-fit to two 1X15P Y-splitter power cable, 450 mm |
Give documentation feedback