Tape drive
Use the section to understand the cable routing for the tape drive.
SAS tape drive
Note
Ensure that all cables are routed through the correct cable clips.
Figure 1. Cable routing for the SAS tape drive
| Cable | From | To |
|---|---|---|
| 1 Signal cable | Signal connector on the tape drive | An available connector on the RAID adapter |
| 2 Power cable | Power connector on the tape drive | Backplane 3 power connector on the system board |
USB tape drive
Note
Ensure that all cables are routed through the correct cable clips.
Figure 2. Cable routing for the USB tape drive
| Cable | From | To |
|---|---|---|
| 1 Signal cable | Signal connector on the tape drive | Internal USB 3.0 connector on the system board |
| 2 Power cable | Power connector on the tape drive | Backplane 3 power connector on the system board |
Give feedback