Compute block parts list

This section describes the components of the ThinkAgile CP compute block.

The parts listed in the table below fall into these categories:

• Tier 1 customer replaceable unit (CRU): Replacing Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.

• Tier 2 customer replaceable unit: You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the warranty service type designated for your compute.

• Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.

• Consumable and structural parts: Purchase and replacement of consumable and structural parts (components such as a cover or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.

Table 1. Compute block part listing

Index	Description	Tier 1 CRU	Tier 2 CRU	FRU	Consumable and Structural part
1	PCIe adapter	✓
2	Air baffle				✓
3	Processor and heat sink assembly (85mm heat sink)			✓
4	Processor and heat sink assembly (108mm heat sink)			✓
5	Processor and heat sink assembly (108mm heat sink)			✓
6	Processor and heat sink assembly (T-shaped heat sink)			✓
7	Trusted Cryptographic Module			✓
8	M.2 backplane	✓
9	DIMM	✓
10	2.5-inch drive bay blank (for empty bays next to the backplane)				✓
11	2.5-inch drive bay blank panel (for drive bays on the backplane)	✓
12	2.5-inch hot-swap drive	✓
13	Compute node tray			✓
14	KVM breakout module	✓
15	2.5-inch 6-drive hot-swap SAS/SATA backplane			✓
16	2.5-inch 6-drive hot-swap SAS/SATA/NVMe backplane			✓
17	2.5-inch 4-drive hot-swap SAS/SATA backplane			✓
18	2.5-inch 4-drive hot-swap NVMe backplane			✓
19	Compute block cover	✓

Figure 1. Compute block components

For more information about ordering the parts shown here, see the following website:

Lenovo Data Center Support page (7X20)