Management switch maintenance procedures (optional)

Procedures for replacing the Lenovo ThinkAgile CP management switch.

Note

A dedicated out-of-band management switch is required for this solution. If the Lenovo ThinkSystem NE0152T RackSwitch is not used, you must provide an out-of-band management switch with the correct configuration. Disregard this procedure if you are not including the Lenovo NE0152T as the management switch in your solution.

Refer to Roles and responsibilities to determine who can perform these procedures.

For information about the terms of the warranty, visit https://datacentersupport.lenovo.com/us/en/warrantylookup.

• Hardware management network cable replacement
  This section describes how to replace a hardware management network cable.
• Replacing the management switch (optional)
  This section covers the procedures required to replace an existing management switch.