Replacing the management switch (optional)

This section covers the procedures required to replace an existing management switch.

Note

A dedicated out-of-band management switch is required for this solution. If the Lenovo ThinkSystem NE0152T RackSwitch is not used, you must provide an out-of-band management switch with the correct configuration. Disregard this procedure if you are not including the NE0152T as the management switch in your solution.

• Removing the management switch (optional)
  This section describes how to remove the ThinkSystem NE0152T RackSwitch from a standard 19‐inch equipment rack. For information about removing the switch from other supported racks, see the appropriate section in this chapter.
• Install the management switch (optional)
  This section covers the procedures to install theThinkSystem NE0152T RackSwitch as the management switch in a ThinkAgile CP solution.