Skip to main content

UEFI Setup

Before deploying a Windows Server or Azure Stack HCI operating system on ThinkAgile MX nodes, it is essential that we configure the servers’ UEFI settings properly. These settings must be manually configured. It is a good idea to double-check that all critical UEFI settings are set properly prior to starting any deployment. The specific steps used to configure UEFI settings depend on the generation of the base server.

Introduction

Use the steps in the UEFI Setup for ThinkAgile MX nodes using V1 and V2 servers topic to configure UEFI settings for all ThinkAgile MX solutions that are based on Lenovo V1 and V2 servers. Specifically, this includes the following ThinkAgile MX solutions:
  • ThinkAgile MX Certified Node on SR650, machine type 7Z20

  • ThinkAgile MX3520 Appliance on SR650, machine type 7D5R

  • ThinkAgile MX1021 on SE350, machine types 7D1B and 7D2U

  • ThinkAgile MX1020 Appliance on SE350, machine type 7D5S

  • ThinkAgile MX3331 Certified Node on SR630 V2, machine type 7D67

  • ThinkAgile MX3330 Appliance on SR630 V2, machine type 7D19

  • ThinkAgile MX3531 Certified Node on SR650 V2, machine type 7D66

  • ThinkAgile MX3530 Appliance on SR650 V2, machine type 7D6B

  • ThinkAgile MX450 Edge IS, machine type 7DG7

Use the steps in the UEFI Setup for ThinkAgile MX nodes using V3 servers topic to configure UEFI settings for all ThinkAgile MX solutions that are based on Lenovo V3 servers. Specifically, this includes the following ThinkAgile MX solutions:
  • ThinkAgile MX630 V3 IS (Integrated System), machine type 7D6U

  • ThinkAgile MX630 V3 CN (Certified Node), machine type 7D6U

  • ThinkAgile MX650 V3 IS (Integrated System), machine type 7D6S

  • ThinkAgile MX650 V3 CN (Certified Node), machine type 7D6S

  • ThinkAgile MX455 V3 Edge IS (Integrated System), machine type 7DGG

  • ThinkAgile MX455 V3 Edge PR (Premier), machine type 7DGP