POST Attempts

Table 1. POST Attempts
Item	Options	Description
Post Attempt Limit	Disabled 9 6 3 (Default)	When the number of consecutive failed POST attempts reaches the limit, the system will reboot with the factory default settings.

Press power button to do power off and then power on at “UEFI:DXE INIT” for the times set in “POST Attempts Limit”, then allow server finish the POST, the message box below would be popped up.

1^st line	The number of consecutive failed POST attempts reached the limit.
2^nd line	System booted with factory default settings.
3^th line	Press any key to enter Setup Utility to modify previously saved settings.
4^th line	If no key is pressed,
5^th line	system will automatically perform a warm reboot with previously saved settings.

Do not press any key, and repeat the actions in step 1 again, the message box below would be popped up.

1^st line	The number of consecutive failed POST attempts reached the limit.
2^nd line	System booted with factory default settings.
3^th line	Press any key to enter Setup Utility to modify previously saved settings.
4^th line	If no key is pressed,
5^th line	system will automatically perform a warm reboot with previously saved settings.

Do not press any key, and repeat the actions in step 1 for the 3rd time, the message box below would be popped up.

1^st line	The number of consecutive failed POST attempts reached the limit.
2^nd line	System booted with factory default settings.
3^th line	Press any key to enter Setup Utility to modify previously saved settings.
4^th line	If no key is pressed,
5^th line	system will shutdown.

Repeat action in step 1 and press any key when message box is popped up. After any key is pressed, below message box is popped up.

1^st line	The number of consecutive failed POST attempts reached the limit.
2^nd line	System booted with factory default settings.
3^th line	Press any key to enter Setup Utility to modify previously saved settings.
4^th line	If no key is pressed,
5^th line	system will automatically do warm reboot with previously saved settings
6^th line	A key press has been detected, system will enter Setup Utility soon.

Use OneCLI to change any settings. Repeat action in step 1.

1^st line	The number of consecutive failed POST attempts reached the limit.
2^nd line	System booted with factory default settings.
3^th line	Previously saved settings have been changed externally through the BMC.
4^th line	Press any key to enter Setup Utility to view or modify the new settings.
5^th line	If no key is pressed,
6^th line	system will automatically do cold reboot with the new settings.

Use OneCLI to change any settings. Repeat action in step 1 and press any key.

1^st line	The number of consecutive failed POST attempts reached the limit.
2^nd line	System booted with factory default settings.
3^th line	Previously saved settings have been changed externally through the BMC.
4^th line	Press any key to enter Setup Utility to view or modify the new settings.
5^th line	If no key is pressed,
6^th line	system will automatically do cold reboot with the new settings.
7^th line	Key is pressed, will enter Setup Utility soon.

Give documentation feedback