Lenovo Edge Servers
This topic provides general introduction to the Unified Extensible Firmware Interface (UEFI).
UEFI is an interface packed with various features, including system information and settings, boot and runtime services, BMC settings, system event logs, and user security. This guide applies to the following server model:
The following table details the main menu:
|System configuration and boot management
|Launch Graphical System Setup
Start the graphical user interface for system setup, provisioning manager, and RAID configuration. When in Graphical System Setup, there will be no screen output to console. Please use VGA monitor for Graphical System Setup.
Display the basic details of the system.
Display or modify system settings. Changes may not take effect immediately. Save any changed settings and reboot the system.
|Date and time
Set the local date and time of the system.
Boot a desired selection from the primary boot sequence as specified under Boot Manager.
Change boot order, boot parameters, and boot from a file.
Configure the management controller.
|System event logs
Clear or view the system event log.
Set or change Power-On and Administrator passwords.
Save the changes and commit them to BMC.
Discard any changes.
|Load Default Settings
Load the default values for system settings.
|Exit Setup Utility