Skip to main content

Removing the bezel

Use this information to remove the bezel.

Read the safety information in Safety and Installation guidelines.

If you are replacing a server component in the server, you need to turn off the server and peripheral devices, and disconnect the power cords and all external cables.

To remove the bezel, complete the following steps.

Note
You must unlock the left-side cover to open or remove the bezel. When you lock the left-side cover, it locks both the cover and the bezel.
  1. Unlock the left-side cover.
  2. From the top section of the bezel door, turn the tab up to unlock the bezel door
    Figure 1. Unlock bezel door
    Unlock bezel door
  3. Open the bezel door by pressing the button on the left edge of the bezel door, and rotate the left side of the bezel door away from the server.
    Figure 2. Open the bezel
    Open the bezel
  4. Pull the hinge assemblies hardly to release the bezel out of the server chassis.
    Note
    The bezel hinge needs to remove at a specific angle around sixty degree. Without doing so, the hinge or even the bezel will get damaged. You may find a white line on hinge as an indicator. To remove bezel needs to align the white line first.
    Figure 3. Release the bezel
    Release the bezel

If you are instructed to return the server component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.