UEFI (POST) error codes
This section details the UEFI (POST) error codes.
UEFI (POST) diagnostic error codes can be generated when the server starts up or while the server is running. UEFI (POST) codes are logged in the Integrated Management Module II (IMM2) event log in the server.
For each event code, the following fields are displayed:
- Event identifier
- An identifier that uniquely identifies an event.
- Event description
- The logged message string that appears for an event.
- Explanation
- Additional information to explain why the event occurred.
- Severity
- An indication of the level of concern for the condition. The severity is abbreviated in the event log to the first character. The following severities can be displayed:
Table 1. Event severity levels Severity Description Informational An informational message is something that was recorded for audit purposes, usually a user action or a change of states that is normal behavior. Warning A warning is not as severe as an error, but if possible, the condition should be corrected before it becomes an error. It might also be a condition that requires additional monitoring or maintenance. Error An error typically indicates a failure or critical condition that impairs service or an expected function.
- User response
- Indicate the actions that you should take to resolve the event.
Perform the steps listed in this section in the order shown until the problem is solved. After you perform all of the actions that are described in this field, if you cannot solve the problem, contact IBM support.
The following is the list of the UEFI (POST) error codes and suggested actions to correct the detected problems.
- I.11002 : [I.11002] A processor mismatch has been detected between one or more processors in the system.
[I.11002] A processor mismatch has been detected between one or more processors in the system. - I.18005 : [I.18005] A discrepancy has been detected in the number of cores reported by one or more processor packages within the system.
[I.18005] A discrepancy has been detected in the number of cores reported by one or more processor packages within the system. - I.18006 : [I.18006] A mismatch between the maximum allowed QPI link speed has been detected for one or more processor packages.
[I.18006] A mismatch between the maximum allowed QPI link speed has been detected for one or more processor packages. - I.18007 : [I.18007] A power segment mismatch has been detected for one or more processor packages.
[I.18007] A power segment mismatch has been detected for one or more processor packages. - I.18008 : [I.18008] A mismatch has been detected between Processors frequency and DDR3 DIMMs frequency.
[I.18008] A mismatch has been detected between Processors frequency and DDR3 DIMMs frequency. - I.18009 : [I.18009] A core speed mismatch has been detected for one or more processor packages.
[I.18009] A core speed mismatch has been detected for one or more processor packages. - I.1800A : [I.1800A] A mismatch has been detected between the speed at which a QPI link has trained between two or more processor packages.
[I.1800A] A mismatch has been detected between the speed at which a QPI link has trained between two or more processor packages. - I.1800B : [I.1800B] A cache size mismatch has been detected for one or more processor packages.
[I.1800B] A cache size mismatch has been detected for one or more processor packages. - I.1800C : [I.1800C] A cache type mismatch has been detected for one or more processor packages.
[I.1800C] A cache type mismatch has been detected for one or more processor packages. - I.1800D : [I.1800D] A cache associativity mismatch has been detected for one or more processor packages.
[I.1800D] A cache associativity mismatch has been detected for one or more processor packages. - I.1800E : [I.1800E] A processor model mismatch has been detected for one or more processor packages.
[I.1800E] A processor model mismatch has been detected for one or more processor packages. - I.1800F : [I.1800F] A processor family mismatch has been detected for one or more processor packages.
[I.1800F] A processor family mismatch has been detected for one or more processor packages. - I.18010 : [I.18010] A processor stepping mismatch has been detected for one or more processor packages.
[I.18010] A processor stepping mismatch has been detected for one or more processor packages. - I.2018002 : [I.2018002] The device found at Bus % Device % Function % could not be configured due to resource constraints. The Vendor ID for the device is % and the Device ID is %.
[I.2018002] The device found at Bus % Device % Function % could not be configured due to resource constraints. The Vendor ID for the device is % and the Device ID is %. - I.2018003 : [I.2018003] A bad option ROM checksum was detected for the device found at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
[I.2018003] A bad option ROM checksum was detected for the device found at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %. - I.3048005 : [I.3048005] UEFI has booted from the backup flash bank.
[I.3048005] UEFI has booted from the backup flash bank. - I.3808004 : [I.3808004] The IMM System Event log (SEL) is full.
[I.3808004] The IMM System Event log (SEL) is full. - I.3818001 : [I.3818001] The firmware image capsule signature for the currently booted flash bank is invalid.
[I.3818001] The firmware image capsule signature for the currently booted flash bank is invalid. - I.3818002 : [I.3818002] The firmware image capsule signature for the non-booted flash bank is invalid.
[I.3818002] The firmware image capsule signature for the non-booted flash bank is invalid. - I.3818003 : [I.3818003] The CRTM flash driver could not lock the secure flash region.
[I.3818003] The CRTM flash driver could not lock the secure flash region. - I.58015 : [I.58015] Memory spare copy initiated.
[I.58015] Memory spare copy initiated. - I.580A4 : [I.580A4] Memory population change detected.
[I.580A4] Memory population change detected. - I.580A5 : [I.580A5] Mirror Fail-over complete. DIMM number % has failed over to to the mirrored copy.
[I.580A5] Mirror Fail-over complete. DIMM number % has failed over to to the mirrored copy. - I.580A6 : [I.580A6] Memory spare copy has completed successfully.
[I.580A6] Memory spare copy has completed successfully. - S.1100B : [S.1100B] CATERR(IERR) has asserted on processor %.
[S.1100B] CATERR(IERR) has asserted on processor %. - S.1100C : [S.1100C] An uncorrectable error has been detected on processor %.
[S.1100C] An uncorrectable error has been detected on processor %. - S.2011001 : [S.2011001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
[S.2011001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %. - S.2018001 : [S.2018001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %.
[S.2018001] An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device is % and the Device ID is %. - S.3020007 : [S.3020007] A firmware fault has been detected in the UEFI image.
[S.3020007] A firmware fault has been detected in the UEFI image. - S.3028002 : [S.3028002] Boot permission timeout detected.
[S.3028002] Boot permission timeout detected. - S.3030007 : [S.3030007] A firmware fault has been detected in the UEFI image.
[S.3030007] A firmware fault has been detected in the UEFI image. - S.3040007 : [S.3040007] A firmware fault has been detected in the UEFI image.
[S.3040007] A firmware fault has been detected in the UEFI image. - S.3050007 : [S.3050007] A firmware fault has been detected in the UEFI image.
[S.3050007] A firmware fault has been detected in the UEFI image. - S.3058004 : [S.3058004] A Three Strike boot failure has occurred. The system has booted with default UEFI settings.
[S.3058004] A Three Strike boot failure has occurred. The system has booted with default UEFI settings. - S.3060007 : [S.3060007] A firmware fault has been detected in the UEFI image.
[S.3060007] A firmware fault has been detected in the UEFI image. - S.3070007 : [S.3070007] A firmware fault has been detected in the UEFI image.
[S.3070007] A firmware fault has been detected in the UEFI image. - S.3108007 : [S.3108007 ] The default system settings have been restored.
[S.3108007 ] The default system settings have been restored. - S.3818004 : [S.3818004] The CRTM flash driver could not successfully flash the staging area. A failure occurred.
[S.3818004] The CRTM flash driver could not successfully flash the staging area. A failure occurred. - S.3818007 : [S.3818007] The firmware image capsules for both flash banks could not be verified.
[S.3818007] The firmware image capsules for both flash banks could not be verified. - S.51003 : [S.51003] An uncorrectable memory error was detected in DIMM slot % on rank %. [S.51003] An uncorrectable memory error was detected on processor % channel %. The failing DIMM within the channel could not be determined. [S.51003] An uncorrectable memory error has been detected during POST.
[S.51003] An uncorrectable memory error was detected in DIMM slot % on rank %. [S.51003] An uncorrectable memory error was detected on processor % channel %. The failing DIMM within the channel could not be determined. [S.51003] An uncorrectable memory error has been detected during POST. - S.51006 : [S.51006] A memory mismatch has been detected. Please verify that the memory configuration is valid.
[S.51006] A memory mismatch has been detected. Please verify that the memory configuration is valid. - S.51009 : [S.51009] No system memory has been detected.
[S.51009] No system memory has been detected. - S.58008 : [S.58008] A DIMM has failed the POST memory test.
[S.58008] A DIMM has failed the POST memory test. - S.68005 : [S.68005] An error has been detected by the the IIO core logic on Bus %. The Global Fatal Error Status register contains %. The Global Non-Fatal Error Status register contains %. Please check error logs for the presence of additional downstream device error data.
[S.68005] An error has been detected by the the IIO core logic on Bus %. The Global Fatal Error Status register contains %. The Global Non-Fatal Error Status register contains %. Please check error logs for the presence of additional downstream device error data. - S.680B8 : [S.680B8] Internal QPI Link Failure Detected.
[S.680B8] Internal QPI Link Failure Detected. - S.680B9 : [S.680B9] External QPI Link Failure Detected.
[S.680B9] External QPI Link Failure Detected. - W.11004 : [W.11004] A processor within the system has failed the BIST.
[W.11004] A processor within the system has failed the BIST. - W.3048006 : [W.3048006] UEFI has booted from the backup flash bank due to an Automatic Boot Recovery (ABR) event.
[W.3048006] UEFI has booted from the backup flash bank due to an Automatic Boot Recovery (ABR) event. - W.305000A : [W.305000A] An invalid date and time have been detected.
[W.305000A] An invalid date and time have been detected. - W.3058009 : [W.3058009] DRIVER HEALTH PROTOCOL: Missing Configuraiton. Requires Change Settings From F1.
[W.3058009] DRIVER HEALTH PROTOCOL: Missing Configuraiton. Requires Change Settings From F1. - W.305800A : [W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
[W.305800A] DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller. - W.305800B : [W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
[W.305800B] DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller. - W.305800C : [W.305800C] DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller.
[W.305800C] DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller. - W.305800D : [W.305800D] DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'.
[W.305800D] DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'. - W.305800E : [W.305800E] DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver.
[W.305800E] DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver. - W.3808000 : [W.3808000] An IMM communication failure has occurred.
[W.3808000] An IMM communication failure has occurred. - W.3808002 : [W.3808002] An error occurred while saving UEFI settings to the IMM.
[W.3808002] An error occurred while saving UEFI settings to the IMM. - W.3808003 : .[W.3808003] Unable to retrieve the system configuration from the IMM.
.[W.3808003] Unable to retrieve the system configuration from the IMM. - W.3818005 : [W.3818005] The CRTM flash driver could not successfully flash the staging area. The update was aborted
[W.3818005] The CRTM flash driver could not successfully flash the staging area. The update was aborted - W.381800D : [W.381800D] TPM physical presence is in asserted state
[W.381800D] TPM physical presence is in asserted state - W.3938002 : [W.3938002] A boot configuration error has been detected.
[W.3938002] A boot configuration error has been detected. - W.50001 : [W.50001] A DIMM has been disabled due to an error detected during POST.
[W.50001] A DIMM has been disabled due to an error detected during POST. - W.58001 : [W.58001] The PFA Threshold limit (correctable error logging limit) has been exceeded on DIMM number % at address %. MC5 Status contains % and MC5 Misc contains %.
[W.58001] The PFA Threshold limit (correctable error logging limit) has been exceeded on DIMM number % at address %. MC5 Status contains % and MC5 Misc contains %. - W.58007 : [W.58007] Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid.
[W.58007] Invalid memory configuration (Unsupported DIMM Population) detected. Please verify memory configuration is valid. - W.580A1 : [W.580A1] Invalid memory configuration for Mirror Mode. Please correct memory configuration.
[W.580A1] Invalid memory configuration for Mirror Mode. Please correct memory configuration. - W.580A2 : [W.580A2] Invalid memory configuration for Sparing Mode. Please correct memory configuration.
[W.580A2] Invalid memory configuration for Sparing Mode. Please correct memory configuration. - W.68002 : [W.68002] A CMOS battery error has been detected
[W.68002] A CMOS battery error has been detected
Give feedback