Skip to main content

encaps command

Use this command to let the BMC quit encapsulation mode.

Encapsulation lite mode is a special network configuration used by LXCA to manage the BMC. When in lite mode, the BMC will only accept network traffic from pre-configured addresses. LXCA typically controls entering and exiting Encapsulation-lite mode. If LXCA fails to exit lite mode properly, this command can be used to re-enable normal network access.

Syntax:
encaps [arguments]
Table 1. encaps arguments
ArgumentsDescription
lite offLet BMC quit encapsulation mode and open global access to all users
Example:
system> encaps
Encapsulation mode is off
system> encaps lite off
ok