Skip to main content

Web interface pages and user roles

Chassis user authority can be managed in the CMM web interface.

Users are assigned authority levels according to user permission groups that are set up for the CMM.

Note
LDAP authority levels are not supported by the CMM web interface.

The table that follows contains the CMM web interface pages and the authorities or roles required to change information on these pages. The authorities listed in the table only apply to changing information or performing a task specific to that page. Viewing information on a page does not require any specific authority.

Before using the table, observe the following guidelines:
  • A dot (·) indicates that all fields or options on the page are accessible, and it requires only one authority at a time.
  • A diamond () indicates that a page requires a combination of two or more authorities. For example, the “Mgt Module Management” is available to a user with the Supervisor authority and to a user with both the Chassis Account Management and Chassis Configuration authorities.
  • Text in a cell indicates that there are specific fields or options that are not accessible.
  • An empty cell indicates that the page is read-only.

The web page command authority relationship table is a multi-row, multi-column complex table where each row lists the web page or option, and the authorities needed to access them. Column one lists the web page or option, and columns two through ten indicate the authorities. Required authorities are indicated with a dot (·) placed in the appropriate column. Text is used in some cases to indicate which option is available on a web page for an authority.

PageAuthority

Supervisor

Chassis Account Management

Chassis Log Management

Chassis Configuration

Chassis Administration

Node Remote Presence

Node Configuration

Node Administration

I/O Module Configuration

I/O Module Administration

System Status   Chassis NameChassis LEDs     
Multi-Chassis Monitor          

The web page command authority relationship table is a multi-row, multi-column complex table where each row lists the web page or option, and the authorities needed to access them. Column one lists the web page or option, and columns two through ten indicate the authorities. Required authorities are indicated with a dot (·) placed in the appropriate column. Text is used in some cases to indicate which option is available on a web page for an authority.

PageAuthority

Supervisor

Chassis Account Management

Chassis Log Management

Chassis Configuration

Chassis Administration

Node Remote Presence

Node Configuration

Node Administration

I/O Module Configuration

I/O Module Administration

Events

Event Log

· ·       
Event Recipients· ·       
Service and Support
Problems·  ·      
Settings·  ·      
Advanced·   Service Reset  Service Reset Service Reset
Download Service Data          
Chassis Management
Chassis·  ··     
Compute Nodes·    Console LaunchGeneral Boot Sequence, Boot Mode property tabs, Settings, Bios PATCH/POST actionsPower/ Restart Actions  
Storage Nodes·    Console LaunchGeneral tabPower/ Restart Actions  
I/O Modules·       General tab, Reset to defaultsPower/ Restart Actions, Firmware
Fans and Cooling·  ··     
Power Modules and Mgmt·  ·      
Component IP Configuration·     · · 
Chassis Internal Network·  ·      
Hardware Topology          
Reports          

The web page command authority relationship table is a multi-row, multi-column complex table where each row lists the web page or option, and the authorities needed to access them. Column one lists the web page or option, and columns two through ten indicate the authorities. Required authorities are indicated with a dot (·) placed in the appropriate column. Text is used in some cases to indicate which option is available on a web page for an authority.

PageAuthority

Supervisor

Chassis Account Management

Chassis Log Management

Chassis Configuration

Chassis Administration

Node Remote Presence

Node Configuration

Node Administration

I/O Module Configuration

I/O Module Administration

Mgt Module Management
User Accounts·       
Firmware·  ··     
Security·  ·      
Network·       
Configuration·  Setup WizardBackup/ Restore     
Properties·  ··     
License Key Management          
Restart·   ·     
Reset to Defaults·       
File Management·  ·· ····