Skip to main content

Removing the shipping brackets kit

Use this information to remove the shipping brackets kit from the server.

To remove the shipping brackets kit, complete the following steps.

  1. Turn off the server (see Turning off the server for instructions) and all attached peripheral devices. Disconnect all power cords; then, disconnect all external cables from the server.
  2. Remove the two (one on each side) 10–32 screws from the brackets on the rear of the chassis.
    Figure 1. Removing the two 10–32 screws
    Removing the two 10–32 screws
  3. Remove the four (two on each side) M6 screws from the brackets on the rear of the chassis and remove the shipping brackets.
    Figure 2. Removing the four M6 screws
    Removing the four M6 screws
  4. Remove the four (two on each side) C-clips from the rack on the rear of the chassis.
    Figure 3. Removing the four C-clips
    Removing the four C-clips

If you are instructed to return the server component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.