Replacing the operator information panel assembly

Use this information to replace the operator information panel assembly.

To install the operator information panel, complete the following steps:

1. Read the safety information that begins on Safety and Installation guidelines.
2. Install the operator information panel assembly into the media cage.
   Figure 1. Operator information panel assembly installation into media cage
   

   

   
   
3. Carefully push the media cage back into the chassis (see Replacing the media cage). Remember to reconnect the cables that were removed from the system board.
4. Reconnect the operator information panel assembly cable to the operator information panel assembly.
5. Reinstall the cover (see Replacing the cover).
6. Slide the server into the rack.
7. Reconnect the power cords and any cables that you removed.
8. Turn on the peripheral devices and the server.