Skip to main content

Removing the media cage

Use this information to remove the media cage.

To remove the media cage (also known as the front I/O cage), complete the following steps:

  1. Read the safety information that begins on Safety and Installation guidelines.
  2. Turn off the server and peripheral devices and disconnect all power cords; then, remove the cover (see Removing the cover).
  3. Remove the air baffle (see Removing the air baffle).
  4. Disconnect the cables that may be attached to the system board. This may include the front USB connector assembly, front video connector assembly, operator information panel assembly, or LCD operating panel assembly cables. After disconnecting the cables, slightly lift the release latch; then, carefully push the media cage out of the chassis and set it aside.
    Note
    Remember the cable routing before disconnecting the cables from the system board.
    Figure 1. Media cage removal
    Media cage removal
  5. If you are instructed to return the media cage, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.