Skip to main content

showppin command

Use the showppin command to get the processor index, PPIN, the machine type, and serial number of target server.

showppin command syntax

OneCli.exe fod showppin <connection options> [--output <folder>]
Table 1. showppin command specific parameters
ParameterRequired/OptionalNotes
--authprotoOptionalThe parameter only for snmpv3, Protocol supported value: MD5/SHA, default: No auth. Format: --authproto MD5 or --authproto.
--communityOptionalCommunity for snmpv1v2. Supported value: public/private/ protect, default: public
--kcsOptionalForce to use IPMI over KCS local interface.
--node, -nOptionalNode index for in-band case on a multi-node system.
--privprotoOptionalThe parameter only for snmpv3. Privacy protocol supported value: DES/AES, default: No privacy.Format: --privproto DES or --privproto.
--privpasswdOptionalPrivacy password.
--sftpOptional

Specify the SFTP server.

Format: user:password@IP:port

--switchOptionalSWITCH connection information. Format: user:password@IP: port
--tftpOptionalTFTP server for snmp interface. Format: user:password@host: port

  • --bmc, -b

  • --bmc-cim-port, -p

  • --bmc-password, -w

  • --bmc-username, -u

  • --cmm, -c

  • --check-trust, -C

  • --never-check-trust, -N

  • --nolog

  • --output, -o

Optional

Refer to Table 2.

Example of the showppin command


OneCli.exe fod showppin --bmc useraccount:password@xx.xx.xx.xx