Skip to main content

uninstall command

Use the uninstall command to uninstall the FoD key from the target key repository.

uninstall command syntax

OneCli.exe fod uninstall < --keyid <key_id>> [<options>]
Table 1. uninstall command specific parameters
ParameterRequired/OptionalNotes
--authprotoOptionalThe parameter only for snmpv3, Protocol supported value: MD5/SHA, default: No auth. Format: --authproto MD5 or --authproto.
--communityOptionalCommunity for snmpv1v2. Supported value: public/private/ protect, default: public.
--kcsOptionalForce to use IPMI over KCS local interface.
--keyidRequiredSpecify the FoD key ID that can be acquired from command report. If the key ID is specified to “all”, all the FoD keys in the target key repository will be uninstalled.
--node, -nOptionalNode index for in-band case on a multi-node system.
--privprotoOptionalThe parameter only for snmpv3. Privacy protocol supported value: DES/AES, default: No privacy.Format: --privproto DES or --privproto.
--privpasswdOptionalPrivacy password.
--sftpOptional

Specify the SFTP server.

Format: user:password@IP:port

--switchOptionalSWITCH connection information. Format: user:password@IP: port
--tftpOptionalTFTP server for snmp interface. Format: user:password@host: port

  • --bmc, -b

  • --bmc-cim-port, -p

  • --bmc-password, -w

  • --bmc-username, -u

  • --cmm

  • --check-trust, -C

  • --never-check-trust, -N

  • --nolog

  • --output, -o

Optional

Refer to Table 2.

Example of the uninstall command


OneCli.exe fod uninstall --keyid xxxxxx --output uninstall --bmc userid:password@host