report command

Use the report command to report the FoD key information from the target key repository.

report command syntax

OneCli.exe fod report [<options>]

Table 1. report command specific parameters
Parameter	Required/Optional	Notes
--authproto	Optional	The parameter only for snmpv3, Protocol supported value: MD5/SHA, default: No auth. Format: --authproto MD5 or --authproto.
--community	Optional	Community for snmpv1v2. Supported value: public/private/ protect, default: public
--kcs	Optional	Force to use IPMI over KCS local interface.
--node, -n	Optional	Node index for in-band case on a multi-node system.
--privproto	Optional	The parameter only for snmpv3. Privacy protocol supported value: DES/AES, default: No privacy.Format: --privproto DES or --privproto.
--privpasswd	Optional	Privacy password.
--sftp	Optional	Specify the SFTP server. Format: user:password@IP:port
--switch	Optional	SWITCH connection information. Format: user:password@IP: port
--tftp	Optional	TFTP server for snmp interface. Format: user:password@host: port
--bmc, -b --bmc-cim-port, -p --bmc-password, -w --bmc-username, -u --cmm, -c --check-trust, -C --never-check-trust, -N --nolog --output, -o	Optional	Refer to Table 2.

Example of the report command

OneCli.exe fod report --switch host --tftp host --community private

Give documentation feedback