Skip to main content

comparedefault command

Use the comparedefault command to compare the current values and the default values of one or more settings.

comparedefault command syntax

OneCli.exe config comparedefault [command option] [<options>]
Table 1. comparedefault command specific parameters
ParameterRequired/OptionalNotes
command optionOptional

  • all: Default value. Displays all of the supported settings.

  • group name: Displays the settings that belong to a group name, such as IMM, UEFI, and so on.

  • setting name: The setting name value.

--kcsOptionalForce to use IPMI over KCS local interface.
--redfishOptionalForce to communicate with BMC through Redfish.

  • --bmc, -b

  • --bmc-rest-port, -p

  • --bmc-password, -w

  • --bmc-username, -u

  • --check-trust, -C

  • --config

  • --node

  • --nolog

  • --never-check-trust, -N

  • --output, -o

  • --redfish

Optional

Refer to Table 2.

Note

  • Some settings do not have a default value and will not be included in the list.

  • The value contained in the <> is the default value, while the other value is current setting value. For example: IMM.PwDiffChar=0<2>, 0 is the current value and 2 is the default value.

Example of the comparedefault command

OneCli.exe config comparedefault --bmc userid:password@host