Skip to main content

showvalues command

Use the showvalues command to list all of the possible values for one or more settings. showvalues also lists the suppressed, grayed-out dependency information.

showvalues command syntax

OneCli.exe config showvalues [command option] [<options>]
Table 1. showvalues command specific parameters
ParameterRequired/OptionalNotes
command optionOptional

  • all: Default value. Displays all of the supported settings.

  • group name: Displays the settings that belong to a group name, such as IMM, UEFI, and so on.

  • setting name: The setting name value.

--compatibility, -cOptionalSpecify the compatibility mode for the UEFI and BMC settings on the ThinkSystem V4 systems. OneCLI tries to convert the legacy UEFI and BMC settings to the flat attributes for the ThinkSystem V4 systems.
--hexOptional

Display the hex number for Integer settings when the --hex parameter is used in the show / showdefault / showvalues command.

Obtain the hex number for Integer setting when the --hex parameter is used in the set command.

--instancesOptionalDisplay the instances settings.
--interactive, -iOptional

Configure the OneCLI interactive mode. In this mode, OneCLI guides user to input the parameter step by step. Users can also click Tab to generate the configuration setting name.

--kcsOptionalForce to use IPMI over KCS local interface.
--redfishOptionalForce to communicate with BMC through Redfish.

  • --bmc, -b

  • --bmc-rest-port, -p

  • --bmc-password, -w

  • --bmc-username, -u

  • --check-trust, -C

  • --config

  • --node

  • --nolog

  • --never-check-trust, -N

  • --output, -o

  • --redfish

Optional

Refer to Table 2.

Example of the showvalues command

In the normal mode:

onecli.exe config showvalues

In the interactive mode:

onecli.exe config showvalus -i