Configuration

Configuration tabs settings are used to manage SMM module.

Figure 1. Configuration

There are twelve sections:

• Firmware Update

• SMTP

• SNMP

• PEF

• Network Configuration

• Time Setting

• User Account

• Account Security

• Service

• Web Certificate

• NTP

• Backup and Restore

Note

By pressing hardware reset button for more than 4 seconds, all settings (except Time Setting) can be restored to out-of-factory default settings.

• Firmware Update
  The firmware update process comes in two phases. During firmware upload stage, you can choose the location where the firmware image is stored. SMM would check the image header information as validation.
• SMTP/SNMP/PEF
  Configured SMTP and SNMP traps allow user to monitor the enclosure for selected events. SMTP/SNMP trap event types can be set in the PEF (Platform Event Filter) page.
• Network Configuration
  You can modify networking parameters in Network configuration.
• Time Setting
  This page is used to configure system time.
• User Account
  User Account page allows you to manage user roles.
• Account Security
  Advanced account security setting allows you to set different values for the following rules.
• Services
  You can configure different HTTPS ports for connection and enable/disable IPMI service state at Services page.
• Web Certificate
  The web certificate page displays current certificate information.
• Network Time Protocol (NTP)
  You can configure the network time protocol and time zone settings at NTP page.
• Backup and Restore
  Configurations are automatically saved when they are set or modified. Back up or restore the configurations to or from a local device.