Skip to main content

FQXSFPU4087G : UEFI extra setting [arg1] value [arg2] is invalid in current UEFI [arg3].

UEFI extra setting [arg1] value [arg2] is invalid in current UEFI [arg3].

The UEFI extra setting value specified by the exposure config file is not suitable for this setting. The reason might be hardware configuration or UEFI build mismatch.

Parameters​

[arg1] UEFI extra setting name specified in the exposure config file which is imported by end user.

[arg2] UEFI extra setting value which is in Redfish format and specified in the exposure config file imported by end user.

[arg3] UEFI current build ID.

Severity​

Warning

User Action​

Complete the following steps:

  1. Check if the current UEFI version is compatible with the UEFI version specified in the exposure config file.
  2. If current UEFI version does not meet the requirement, update UEFI to the compatible version at first, and then re-import the exposure config file.
  3. If the value is still invalid, configure the setting with the supported value through out-of-band and restart the system to take effect. Also reply if the setting value is set successfully or not.
  4. If need a new exposure config file compatible with current UEFI version, collect service data log. Contact Lenovo Support.