Skip to main content

FQXSFPU4089G : UEFI extra setting [arg1] value [arg2] for custom default[arg3] is invalid in current UEFI [arg4].

UEFI extra setting [arg1] value [arg2] for custom default[arg3] is invalid in current UEFI [arg4].

Parameters​

[arg1] UEFI extra setting name specified in the exposure config file which is imported by end user.

[arg2] Custom default value specified for the UEFI extra setting in the exposure config file which is imported by end user.

[arg3] UEFI custom default name specified in the UEFI extra setting exposure config file which is imported by end user. Only one custom default is supported now, then always output “”.

[arg4] UEFI current build ID.

The custom default value specified for the UEFI extra setting in the exposure config file is not suitable for this setting. The reason might be hardware configuration or UEFI build mismatch.

Severity​

Warning

User Action​

Complete the following steps:

  1. Check if the current UEFI version is compatible with the UEFI version specified in the exposure config file.
  2. If current UEFI version does not meet the requirement, update UEFI to the compatible version at first, and then re-import the exposure config file.
  3. If the custom default value is still invalid, configure the setting with the supported value through out-of-band and restart the system to take effect. And then create custom default based on the supported value. (Note, the values of all other settings would be set to custom default values also before creating custom defaults)
  4. If need to add custom default for the UEFI extra setting through the exposure config file, collect service data log. Contact Lenovo Support.