M.2 boot adapter cable routing
Follow instructions in this section to route the cables for the M.2 boot adapter.
Note
- Connections between connectors; 1↔1, 2↔2, 3↔3, ... n↔n
- When routing the cables, make sure that all cables are routed appropriately through the corresponding cable guides and cable clips.
Figure 1. M.2 boot adapter cable routing
| From (M.2 boot adapter) | To (System board) | Cable length |
|---|---|---|
| 1 Signal and power connector | 1a M.2 boot adapter power and sideband connector | 640/305 mm |
| 1b M.2 boot adapter signal connector |
Give documentation feedback