This topic provides information about various power supply LED status and corresponding action suggestions.
- The following minimal configuration is required for the node to start:
One processor in socket 1
One memory module in DIMM slot 4
One power supply in PSU slot 1
One boot drive, M.2 or E3.S drive, and RAID adapter if configured (If OS is needed by debugging)
- Four system fans
LED | Description |
|---|
1 Power supply status | The power supply status LED can be in one of the following states: Green: The power supply is connected to the AC power source and working normally. Off: The power supply is disconnected from the AC power source. Slow blinking green (about one flash every second): The power supply is in PSU standby state with AC present, cold standby state, or always standby state. Amber: The AC power cord is unplugged, AC power lost (with a second power supply in parallel still in AC power input power), or power supply has failed. To resolve the issue, replace the power supply. Slow blinking amber (about one flash every second): Power supply warning events where the power supply continues to operate.
|
