FQXPMUP0204M : BMC communication failed: Execute the update cmd failure. Failed to update the firmware

Severity​

Error

User Action​

1. Restart BMC via supported method.

2. Reflash BMC firmware.

3. Perform AC reset or virtual reseat.

   Note

   When performing AC reset, after powering off AC, wait several seconds before powering on AC. After AC power is restored, power on the host system.

4. If the problem persists, try a different Lenovo tool to perform the update (eg. XClarity Administrator, XClarity Controller, or XClarity Essential OneCLI).

5. If the problem persists, contact technical support.