XClarity Controller events
When a hardware event is detected by the Lenovo XClarity Controller on the server, the Lenovo XClarity Controller writes that event in the system-event log on the server.
Note
Event identifier (ID) is a unique identifier used to search for XCC events. The event message may have one or more arguments, which could be replaceable text of FRU name or sensor name to identify the failed component. So one XCC event ID could represent a generic event or similar faults that happened on different hardware components. The general way of problem determination is to locate the event by ID, identify the hardware component by message argument if it contains hardware component name, and then perform actions defined in User Action.
Example:
FQXSPCA0017M: Sensor [SensorElementName] has transitioned to critical from a less severe state
FQXSPCA0017M is the event ID.
[SensorElementName] is a sensor variable, indicating the name of hardware component. It can be CPU, PCI adapter, OCP card or chipset. You can find the event by the event ID FQXSPCA0017M and perform actions defined in User Action for the component.
For additional information about the Lenovo XClarity Controller event log, see Viewing Event Logs
section in the XCC documentation compatible with your server at Lenovo XClarity Controller portal page.
For each event code, the following fields are displayed:
- Event identifier
- An identifier that uniquely identifies an event.
- Event description
- The logged message string that appears for an event. When the event string is displayed in the event log, information such as a specific component is displayed. In this documentation, that additional information appears as variables, which include but not limited to the following:
[SensorElementName], [ManagedElementName] , [ProcessorElementName], [ComputerSystemElementName], [PowerSupplyElementName], ...
[arg1], [arg2], [arg3], [arg4], [arg5]...
- Explanation
- Provides additional information to explain why the event occurred.
- Severity
- An indication of the level of concern for the condition. The following severities can be displayed.
Informational. The event was recorded for audit purposes, usually a user action or a change of states that is normal behavior.
Warning. The event is not as severe as an error, but if possible, the condition should be corrected before it becomes an error. It might also be a condition that requires additional monitoring or maintenance.
Error. The event is a failure or critical condition that impairs service or an expected function.
- Alert Category
- Similar events are grouped together in categories. The alert category is in the following format: severity - device, where:
severity is one of the following severity levels:
Critical. A key component in the server is no longer functioning.
Warning. The event might progress to a critical level.
System. The event is the result of a system error or a configuration change.
device is the specific device in the server that caused the event to be generated.
- Serviceable
- Specifies whether user action is required to correct the problem.
- CIM Information
- Provides the prefix of the message ID and the sequence number that is used by the CIM message registry.
- SNMP Trap ID
- The SNMP trap ID that is found in the SNMP alert management information base (MIB).
- Automatically contact Service
- You can configure the Lenovo XClarity Administrator to automatically notify Support (also known as call home) if certain types of errors are encountered. If you have configured this function and this field is set to Yes, Lenovo Support will be notified automatically if the event is generated. While you wait for Lenovo Support to call, you can perform the recommended actions for the event.NoteThis documentation includes references to IBM web sites, products, and information about obtaining service. IBM is Lenovo's preferred service provider for the Lenovo server products.
For more information about enabling Call Home from Lenovo XClarity Administrator, see Setting up automatic problem notification to Lenovo Support (Call Home). In addition, see XCC events that automatically notify Support for a consolidated list of all Lenovo XClarity Controller events that are called home to Lenovo Support.
- User Action
- Indicates what actions you should perform to solve the event. Perform the steps listed in this section in the order shown until the problem is solved. If you cannot solve the problem after performing all steps, contact Lenovo Support.
- XCC events that automatically notify Support
You can configure the XClarity Administrator to automatically notify Support (also known as call home) if certain types of errors are encountered. If you have configured this function, see the table for a list of events that automatically notify Support. - XCC events organized by severity
The following table lists all XCC events, organized by severity (Information, Error, and Warning). - FQXSPBR4000I : Management Controller [arg1]: Configuration restored from a file by user [arg2] from [arg3] at IP address [arg4].
Management Controller [arg1]: Configuration restored from a file by user [arg2] from [arg3] at IP address [arg4]. - FQXSPBR4001I : Running the backup Management Controller [arg1] main application.
Running the backup Management Controller [arg1] main application. - FQXSPBR4002I : Management Controller [arg1] Reset was caused by restoring default values.
Management Controller [arg1] Reset was caused by restoring default values. - FQXSPBR4003I : Platform Watchdog Timer expired for [arg1].
Platform Watchdog Timer expired for [arg1]. - FQXSPBR4004I : Server timeouts set by user [arg1]: EnableOSWatchdog=[arg2], OSWatchdogTimout=[arg3], EnableLoaderWatchdog=[arg4], LoaderTimeout=[arg5].
Server timeouts set by user [arg1]: EnableOSWatchdog=[arg2], OSWatchdogTimout=[arg3], EnableLoaderWatchdog=[arg4], LoaderTimeout=[arg5]. - FQXSPBR4005I : Management Controller [arg1]: Configuration saved to a file by user [arg2].
Management Controller [arg1]: Configuration saved to a file by user [arg2]. - FQXSPBR4006I : Management Controller [arg1]: Configuration restoration from a file by user [arg2] completed from [arg3] at IP address [arg4].
Management Controller [arg1]: Configuration restoration from a file by user [arg2] completed from [arg3] at IP address [arg4]. - FQXSPBR4007I : Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to complete from [arg3] at IP address [arg4].
Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to complete from [arg3] at IP address [arg4]. - FQXSPBR4008I : Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to start from [arg3] at IP address [arg4].
Management Controller [arg1]: Configuration restoration from a file by user [arg2] failed to start from [arg3] at IP address [arg4]. - FQXSPBR4009I : Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3].
Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3]. - FQXSPBR400AI : Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] completed.
Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] completed. - FQXSPBR400BI : Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] failed to complete.
Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] failed to complete. - FQXSPBR400CI : Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] failed to start.
Management Controller [arg1]: cloning configuration from neighbor server [arg2] by group name [arg3] failed to start. - FQXSPBR400DI : Neighbor group clone configuration was initiated by user [arg1].
Neighbor group clone configuration was initiated by user [arg1]. - FQXSPBR400EI : Neighbor group firmware update was initiated by user [arg1].
Neighbor group firmware update was initiated by user [arg1]. - FQXSPBR400FI : The neighbor group management is [arg1] by user [arg2] from [arg3] at IP address [arg4].
The neighbor group management is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPBT0007I : No bootable media available for system [ComputerSystemElementName].
No bootable media available for system [ComputerSystemElementName]. - FQXSPCA0002M : Numeric sensor [NumericSensorElementName] going low (lower critical) has asserted.
Numeric sensor [NumericSensorElementName] going low (lower critical) has asserted. - FQXSPCA0007J : Numeric sensor [NumericSensorElementName] going high (upper non-critical) has asserted.
Numeric sensor [NumericSensorElementName] going high (upper non-critical) has asserted. - FQXSPCA0009M : Numeric sensor [NumericSensorElementName] going high (upper critical) has asserted.
Numeric sensor [NumericSensorElementName] going high (upper critical) has asserted. - FQXSPCA0011N : Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has asserted.
Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has asserted. - FQXSPCA0017M : Sensor [SensorElementName] has transitioned to critical from a less severe state.
Sensor [SensorElementName] has transitioned to critical from a less severe state. - FQXSPCA0019N : Sensor [SensorElementName] has transitioned to non-recoverable from a less severe state.
Sensor [SensorElementName] has transitioned to non-recoverable from a less severe state. - FQXSPCA2002I : Numeric sensor [NumericSensorElementName] going low (lower critical) has deasserted.
Numeric sensor [NumericSensorElementName] going low (lower critical) has deasserted. - FQXSPCA2007I : Numeric sensor [NumericSensorElementName] going high (upper non-critical) has deasserted.
Numeric sensor [NumericSensorElementName] going high (upper non-critical) has deasserted. - FQXSPCA2009I : Numeric sensor [NumericSensorElementName] going high (upper critical) has deasserted.
Numeric sensor [NumericSensorElementName] going high (upper critical) has deasserted. - FQXSPCA2011I : Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has deasserted.
Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has deasserted. - FQXSPCA2017I : Sensor [SensorElementName] has transitioned to a less severe state from critical.
Sensor [SensorElementName] has transitioned to a less severe state from critical. - FQXSPCA2019I : Sensor [SensorElementName] has deasserted the transition to non-recoverable from a less severe state.
Sensor [SensorElementName] has deasserted the transition to non-recoverable from a less severe state. - FQXSPCN4000I : Serial Redirection set by user [arg1]: Mode=[arg2], BaudRate=[arg3], StopBits=[arg4], Parity=[arg5], SessionTerminateSequence=[arg6].
Serial Redirection set by user [arg1]: Mode=[arg2], BaudRate=[arg3], StopBits=[arg4], Parity=[arg5], SessionTerminateSequence=[arg6]. - FQXSPCN4001I : Remote Control session started by user [arg1] in [arg2] mode.
Remote Control session started by user [arg1] in [arg2] mode. - FQXSPCN4002I : User [arg1] has terminated an active CLI console session.
User [arg1] has terminated an active CLI console session. - FQXSPCN4003I : Remote Control session started by user [arg1] in [arg2] mode has been closed.
Remote Control session started by user [arg1] in [arg2] mode has been closed. - FQXSPCN4004I : User [arg1] has created an active [arg2] console session.
User [arg1] has created an active [arg2] console session. - FQXSPCN4005I : A [arg1] console session is timeout.
A [arg1] console session is timeout. - FQXSPCN4006I : User [arg1] has terminated an active IPMI console session.
User [arg1] has terminated an active IPMI console session. - FQXSPCR0001N : Sensor [SensorElementName] has transitioned to non-recoverable from a less severe state.
Sensor [SensorElementName] has transitioned to non-recoverable from a less severe state. - FQXSPCR2001I : Sensor [SensorElementName] has deasserted the transition to non-recoverable from a less severe state.
Sensor [SensorElementName] has deasserted the transition to non-recoverable from a less severe state. - FQXSPDM4000I : Inventory data changed for device [arg1], new device data hash=[arg2], new master data hash=[arg3] .
Inventory data changed for device [arg1], new device data hash=[arg2], new master data hash=[arg3] . - FQXSPDM4001I : Storage [arg1] has changed.
Storage [arg1] has changed. - FQXSPDM4002I : Device [arg1] VPD is not valid.
Device [arg1] VPD is not valid. - FQXSPDM4003I : TKLM servers set by user [arg1]: TKLMServer1=[arg2] Port=[arg3], TKLMServer2=[arg4] Port=[arg5], TKLMServer3=[arg6] Port=[arg7], TKLMServer4=[arg8] Port=[arg9].
TKLM servers set by user [arg1]: TKLMServer1=[arg2] Port=[arg3], TKLMServer2=[arg4] Port=[arg5], TKLMServer3=[arg6] Port=[arg7], TKLMServer4=[arg8] Port=[arg9]. - FQXSPDM4004I : TKLM servers device group set by user [arg1]: TKLMServerDeviceGroup=[arg2] .
TKLM servers device group set by user [arg1]: TKLMServerDeviceGroup=[arg2] . - FQXSPDM4005I : User [arg1] has generated a new encryption key pair and installed a self-signed certificate for the TKLM client.
User [arg1] has generated a new encryption key pair and installed a self-signed certificate for the TKLM client. - FQXSPDM4006I : User [arg1] has generated a new encryption key and certificate signing request for the TKLM client.
User [arg1] has generated a new encryption key and certificate signing request for the TKLM client. - FQXSPDM4007I : User [arg1] has imported a signed certificate for the TKLM client from [arg2].
User [arg1] has imported a signed certificate for the TKLM client from [arg2]. - FQXSPDM4008I : User [arg1] has imported a server certificate for the TKLM server.
User [arg1] has imported a server certificate for the TKLM server. - FQXSPDM4009I : User [arg1] has [arg2] file [arg3] from [arg4].
User [arg1] has [arg2] file [arg3] from [arg4]. - FQXSPDM4011I : EKMS server protocol set by user [arg1]: TKLMServerProtocol=[arg2] .
EKMS server protocol set by user [arg1]: TKLMServerProtocol=[arg2] . - FQXSPEA0001J : Sensor [SensorElementName] has transitioned from normal to non-critical state.
Sensor [SensorElementName] has transitioned from normal to non-critical state. - FQXSPEA0002M : Sensor [SensorElementName] has transitioned to critical from a less severe state.
Sensor [SensorElementName] has transitioned to critical from a less severe state. - FQXSPEA0003J : Link down is detected on port [arg1] of the PCIe device [arg2].
Link down is detected on port [arg1] of the PCIe device [arg2]. - FQXSPEA2001I : Sensor [SensorElementName] has deasserted the transition from normal to non-critical state.
Sensor [SensorElementName] has deasserted the transition from normal to non-critical state. - FQXSPEA2002I : Sensor [SensorElementName] has transitioned to a less severe state from critical.
Sensor [SensorElementName] has transitioned to a less severe state from critical. - FQXSPEM4000I : The [arg1] on system [arg2] cleared by user [arg3].
The [arg1] on system [arg2] cleared by user [arg3]. - FQXSPEM4001I : The [arg1] on system [arg2] is 75% full.
The [arg1] on system [arg2] is 75% full. - FQXSPEM4002I : The [arg1] on system [arg2] is 100% full.
The [arg1] on system [arg2] is 100% full. - FQXSPEM4003I : LED [arg1] state changed to [arg2] by [arg3].
LED [arg1] state changed to [arg2] by [arg3]. - FQXSPEM4004I : SNMP [arg1] enabled by user [arg2] .
SNMP [arg1] enabled by user [arg2] . - FQXSPEM4005I : SNMP [arg1] disabled by user [arg2] .
SNMP [arg1] disabled by user [arg2] . - FQXSPEM4006I : Alert Configuration Global Event Notification set by user [arg1]: RetryLimit=[arg2], RetryInterval=[arg3], EntryInterval=[arg4].
Alert Configuration Global Event Notification set by user [arg1]: RetryLimit=[arg2], RetryInterval=[arg3], EntryInterval=[arg4]. - FQXSPEM4007I : Alert Recipient Number [arg1] updated: Name=[arg2], DeliveryMethod=[arg3], Address=[arg4], IncludeLog=[arg5], Enabled=[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8] by user [arg9] from [arg10] at IP address [arg11].
Alert Recipient Number [arg1] updated: Name=[arg2], DeliveryMethod=[arg3], Address=[arg4], IncludeLog=[arg5], Enabled=[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8] by user [arg9] from [arg10] at IP address [arg11]. - FQXSPEM4008I : SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2], AllowedFilters=[arg3] .
SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2], AllowedFilters=[arg3] . - FQXSPEM4009I : The UEFI Definitions have been changed.
The UEFI Definitions have been changed. - FQXSPEM4010I : UEFI Reported: [arg1].
UEFI Reported: [arg1]. - FQXSPEM4011I : XCC failed to log previous event [arg1].
XCC failed to log previous event [arg1]. - FQXSPEM4012I : User [arg1] made system [arg2] Encapsulation lite Mode.
User [arg1] made system [arg2] Encapsulation lite Mode. - FQXSPEM4013I : Battery error was detected by RAID controller. The battery unit needs replacement.([arg1],[arg2],[arg3],[arg4],[arg5])
Battery error was detected by RAID controller. The battery unit needs replacement.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4014I : The RAID controller has problem with the battery. Please contact technical support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5])
The RAID controller has problem with the battery. Please contact technical support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4015I : The RAID controller detected unrecoverable error. The controller needs replacement.([arg1],[arg2],[arg3],[arg4],[arg5])
The RAID controller detected unrecoverable error. The controller needs replacement.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4016I : The RAID controller detected one or more problems. Please contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5])
The RAID controller detected one or more problems. Please contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4017I : The RAID controller detected one or more possible configuration changes within the subsystem. Please check the drive LED status. If necessary, contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5])
The RAID controller detected one or more possible configuration changes within the subsystem. Please check the drive LED status. If necessary, contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4018I : Enclosure/Chassis issue detected with one or more units. Please check the enclosure/chassis units to repair the problem.([arg1],[arg2],[arg3],[arg4],[arg5])
Enclosure/Chassis issue detected with one or more units. Please check the enclosure/chassis units to repair the problem.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4019I : Connectivity issue detected with the enclosure/chassis. Please check your cable configurations to repair the problem.([arg1],[arg2],[arg3],[arg4],[arg5])
Connectivity issue detected with the enclosure/chassis. Please check your cable configurations to repair the problem.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4020I : Fan problem detected with the enclosure/chassis. Please check the enclosure/chassis unit fan for correct operation.([arg1],[arg2],[arg3],[arg4],[arg5])
Fan problem detected with the enclosure/chassis. Please check the enclosure/chassis unit fan for correct operation.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4022I : Enclosure/Chassis power supply has problem. Please check the enclosure/chassis unit power supply for correct operation.([arg1],[arg2],[arg3],[arg4],[arg5])
Enclosure/Chassis power supply has problem. Please check the enclosure/chassis unit power supply for correct operation.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4023I : One or more virtual drive are in abnormal status that may cause unavailable virtual drive. Please check the event logs and if events are targeted to the same disk then replace the drive. If necessary, contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5])
One or more virtual drive are in abnormal status that may cause unavailable virtual drive. Please check the event logs and if events are targeted to the same disk then replace the drive. If necessary, contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4024I : The RAID controller detected one or more possible configuration problem within the subsystem. Please check the event logs and if events are targeted to the same disk then replace the drive. If necessary, contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5])
The RAID controller detected one or more possible configuration problem within the subsystem. Please check the event logs and if events are targeted to the same disk then replace the drive. If necessary, contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4025I : One or more virtual drive have problem. Please contact technical support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5])
One or more virtual drive have problem. Please contact technical support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4026I : Drive error was detected by RAID controller. Please contact technical support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5])
Drive error was detected by RAID controller. Please contact technical support to resolve this issue.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4027I : Drive error was detected by RAID controller. Please check the event logs and if events are targeted to the same disk then replace the drive. If necessary, contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5])
Drive error was detected by RAID controller. Please check the event logs and if events are targeted to the same disk then replace the drive. If necessary, contact technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4028I : The port [arg1] of PCIe device [arg2] at [arg3] has link [arg4].
The port [arg1] of PCIe device [arg2] at [arg3] has link [arg4]. - FQXSPEM4029I : All PCIe slots on [arg1] may not be functional based upon your current CPU population.
All PCIe slots on [arg1] may not be functional based upon your current CPU population. - FQXSPEM4030I : A scheduled operation on the RAID controller has encountered an issue. Refer to RAID Logs under Server Management, Local Storage, for details.([arg1],[arg2],[arg3],[arg4],[arg5])
A scheduled operation on the RAID controller has encountered an issue. Refer to RAID Logs under Server Management, Local Storage, for details.([arg1],[arg2],[arg3],[arg4],[arg5]) - FQXSPEM4031I : SSD wear threshold setting is changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
SSD wear threshold setting is changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPEM4032I : Acoustic Mode [arg1] has been engaged. Fan speed limits are in place.
Acoustic Mode [arg1] has been engaged. Fan speed limits are in place. - FQXSPEM4033I : Acoustic Mode [arg1] has been disengaged to allow adequate cooling.
Acoustic Mode [arg1] has been disengaged to allow adequate cooling. - FQXSPEM4036I : Dust filter measurement schedule is configured on server [arg1] by user [arg2] from [arg3] at IP address [arg4].
Dust filter measurement schedule is configured on server [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPEM4037I : Attempting to perform scheduled dust filter measurement on server [arg1].
Attempting to perform scheduled dust filter measurement on server [arg1]. - FQXSPEM4038I : Dust filter measurement schedule is disabled on server [arg1] by user [arg2] from [arg3] at IP address [arg4].
Dust filter measurement schedule is disabled on server [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPEM4039I : Attempting to perform an immediate dust filter measurement on server [arg1] by user [arg2] from [arg3] at IP address [arg4].
Attempting to perform an immediate dust filter measurement on server [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPEM4040I : Dust filter measurement is completed. The airflow pathway is obstructed, check and replace the dust filter, or remove any obstructing object.
Dust filter measurement is completed. The airflow pathway is obstructed, check and replace the dust filter, or remove any obstructing object. - FQXSPEM4041I : The SmartNIC in slot [arg1] encountered boot timeout.
The SmartNIC in slot [arg1] encountered boot timeout. - FQXSPEM4042I : The SmartNIC in slot [arg1] went through a crash dump.
The SmartNIC in slot [arg1] went through a crash dump. - FQXSPEM4043I : A [arg1] failure has been detected and need [arg2] to recover.
A [arg1] failure has been detected and need [arg2] to recover. - FQXSPEM4044I : Dust filter measurement was successfully completed, no action is needed.
Dust filter measurement was successfully completed, no action is needed. - FQXSPFC4000I : The bare metal connection process has been started.
The bare metal connection process has been started. - FQXSPFC4001I : The bare metal update application reports a status of [arg1].
The bare metal update application reports a status of [arg1]. - FQXSPFC4002I : System running in setup.
System running in setup. - FQXSPFC4003I : UEFI deployment boot mode is enabled for NextBoot.
UEFI deployment boot mode is enabled for NextBoot. - FQXSPFC4004I : UEFI deployment boot mode is enabled for NextAc.
UEFI deployment boot mode is enabled for NextAc. - FQXSPFC4005I : UEFI deployment boot mode has been disabled.
UEFI deployment boot mode has been disabled. - FQXSPFW0000N : The System [ComputerSystemElementName] encountered a POST Error.
The System [ComputerSystemElementName] encountered a POST Error. - FQXSPFW0002N : The System [ComputerSystemElementName] encountered a firmware hang.
The System [ComputerSystemElementName] encountered a firmware hang. - FQXSPIO0003N : A diagnostic interrupt has occurred on system [ComputerSystemElementName].
A diagnostic interrupt has occurred on system [ComputerSystemElementName]. - FQXSPIO0004L : A bus timeout has occurred on bus [SensorElementName].
A bus timeout has occurred on bus [SensorElementName]. - FQXSPIO0006N : A software NMI has occurred on system [ComputerSystemElementName].
A software NMI has occurred on system [ComputerSystemElementName]. - FQXSPIO0007N : A PCI PERR has occurred on system [ComputerSystemElementName].
A PCI PERR has occurred on system [ComputerSystemElementName]. - FQXSPIO0008N : A PCI SERR has occurred on system [ComputerSystemElementName].
A PCI SERR has occurred on system [ComputerSystemElementName]. - FQXSPIO0010I : A Correctable Bus Error has occurred on bus [SensorElementName].
A Correctable Bus Error has occurred on bus [SensorElementName]. - FQXSPIO0011N : An Uncorrectable Error has occurred on [SensorElementName].
An Uncorrectable Error has occurred on [SensorElementName]. - FQXSPIO0013N : A Fatal Bus Error has occurred on bus [SensorElementName].
A Fatal Bus Error has occurred on bus [SensorElementName]. - FQXSPIO0014J : Bus [SensorElementName] is operating in a degraded state.
Bus [SensorElementName] is operating in a degraded state. - FQXSPIO0015M : Fault in slot [PhysicalConnectorSystemElementName] on system [ComputerSystemElementName].
Fault in slot [PhysicalConnectorSystemElementName] on system [ComputerSystemElementName]. - FQXSPIO2003I : System [ComputerSystemElementName] has recovered from a diagnostic interrupt.
System [ComputerSystemElementName] has recovered from a diagnostic interrupt. - FQXSPIO2004I : Bus [SensorElementName] has recovered from a bus timeout.
Bus [SensorElementName] has recovered from a bus timeout. - FQXSPIO2006I : System [ComputerSystemElementName] has recovered from an NMI.
System [ComputerSystemElementName] has recovered from an NMI. - FQXSPIO2007I : A PCI PERR recovery has occurred on system [ComputerSystemElementName].
A PCI PERR recovery has occurred on system [ComputerSystemElementName]. - FQXSPIO2008I : A PCI SERR on system [ComputerSystemElementName] has deasserted.
A PCI SERR on system [ComputerSystemElementName] has deasserted. - FQXSPIO2010I : Bus [SensorElementName] has recovered from a Correctable Bus Error.
Bus [SensorElementName] has recovered from a Correctable Bus Error. - FQXSPIO4001I : GPU Board Status was changed by [arg1] of [arg1].
GPU Board Status was changed by [arg1] of [arg1]. - FQXSPIO4002I : GPU Board Status was recovered by [arg1] of [arg1].
GPU Board Status was recovered by [arg1] of [arg1]. - FQXSPMA0001I : Error Detected and Corrected for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Error Detected and Corrected for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]. - FQXSPMA0002N : Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]. - FQXSPMA0007L : Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]. - FQXSPMA0008N : Uncorrectable error detected for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Uncorrectable error detected for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]. - FQXSPMA0010J : [PhysicalMemoryElementName] on Subsystem [MemoryElementName] Throttled.
[PhysicalMemoryElementName] on Subsystem [MemoryElementName] Throttled. - FQXSPMA0011G : Memory Logging Limit Reached for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Memory Logging Limit Reached for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]. - FQXSPMA0012M : An Over-Temperature Condition has been detected on the [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
An Over-Temperature Condition has been detected on the [PhysicalMemoryElementName] on Subsystem [MemoryElementName]. - FQXSPMA0022I : Post Package Repair Success for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Post Package Repair Success for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]. - FQXSPMA0023I : Post Package Repair Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Post Package Repair Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName]. - FQXSPMA0024G : Sensor [SensorElementName] has asserted.
Sensor [SensorElementName] has asserted. - FQXSPMA0025I : Sensor [SensorElementName] has asserted.
Sensor [SensorElementName] has asserted. - FQXSPMA2007I : Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName] has recovered.
Scrub Failure for [PhysicalMemoryElementName] on Subsystem [MemoryElementName] has recovered. - FQXSPMA2010I : [PhysicalMemoryElementName] on Subsystem [MemoryElementName] is no longer Throttled.
[PhysicalMemoryElementName] on Subsystem [MemoryElementName] is no longer Throttled. - FQXSPMA2012I : An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
An Over-Temperature Condition has been removed on the [PhysicalMemoryElementName] on Subsystem [MemoryElementName]. - FQXSPMA2024I : Sensor [SensorElementName] has deasserted.
Sensor [SensorElementName] has deasserted. - FQXSPNM4000I : Management Controller [arg1] Network Initialization Complete.
Management Controller [arg1] Network Initialization Complete. - FQXSPNM4001I : Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3].
Ethernet Data Rate modified from [arg1] to [arg2] by user [arg3]. - FQXSPNM4002I : Ethernet Duplex setting modified from [arg1] to [arg2] by user [arg3].
Ethernet Duplex setting modified from [arg1] to [arg2] by user [arg3]. - FQXSPNM4003I : Ethernet MTU setting modified from [arg1] to [arg2] by user [arg3].
Ethernet MTU setting modified from [arg1] to [arg2] by user [arg3]. - FQXSPNM4004I : Ethernet locally administered MAC address modified from [arg1] to [arg2] by user [arg3].
Ethernet locally administered MAC address modified from [arg1] to [arg2] by user [arg3]. - FQXSPNM4005I : Ethernet interface [arg1] by user [arg2].
Ethernet interface [arg1] by user [arg2]. - FQXSPNM4006I : Hostname set to [arg1] by user [arg2].
Hostname set to [arg1] by user [arg2]. - FQXSPNM4007I : IP address of network interface modified from [arg1] to [arg2] by user [arg3].
IP address of network interface modified from [arg1] to [arg2] by user [arg3]. - FQXSPNM4008I : IP subnet mask of network interface modified from [arg1] to [arg2] by user [arg3].
IP subnet mask of network interface modified from [arg1] to [arg2] by user [arg3]. - FQXSPNM4009I : IP address of default gateway modified from [arg1] to [arg2] by user [arg3].
IP address of default gateway modified from [arg1] to [arg2] by user [arg3]. - FQXSPNM4010I : DHCP[[arg1]] failure, no IP address assigned.
DHCP[[arg1]] failure, no IP address assigned. - FQXSPNM4011I : ENET[[arg1]] DHCP-HSTN=[arg2], DN=[arg3], IP@=[arg4], SN=[arg5], GW@=[arg6], DNS1@=[arg7] .
ENET[[arg1]] DHCP-HSTN=[arg2], DN=[arg3], IP@=[arg4], SN=[arg5], GW@=[arg6], DNS1@=[arg7] . - FQXSPNM4012I : ENET[[arg1]] IP-Cfg:HstName=[arg2], IP@=[arg3] ,NetMsk=[arg4], GW@=[arg5] .
ENET[[arg1]] IP-Cfg:HstName=[arg2], IP@=[arg3] ,NetMsk=[arg4], GW@=[arg5] . - FQXSPNM4013I : LAN: Ethernet[[arg1]] interface is no longer active.
LAN: Ethernet[[arg1]] interface is no longer active. - FQXSPNM4014I : LAN: Ethernet[[arg1]] interface is now active.
LAN: Ethernet[[arg1]] interface is now active. - FQXSPNM4015I : DHCP setting changed to [arg1] by user [arg2].
DHCP setting changed to [arg1] by user [arg2]. - FQXSPNM4016I : Domain name set to [arg1] by user [arg2].
Domain name set to [arg1] by user [arg2]. - FQXSPNM4017I : Domain Source changed to [arg1] by user [arg2].
Domain Source changed to [arg1] by user [arg2]. - FQXSPNM4018I : DDNS setting changed to [arg1] by user [arg2].
DDNS setting changed to [arg1] by user [arg2]. - FQXSPNM4019I : DDNS registration successful. The domain name is [arg1].
DDNS registration successful. The domain name is [arg1]. - FQXSPNM4020I : IPv6 enabled by user [arg1] .
IPv6 enabled by user [arg1] . - FQXSPNM4021I : IPv6 disabled by user [arg1] .
IPv6 disabled by user [arg1] . - FQXSPNM4022I : IPv6 static IP configuration enabled by user [arg1].
IPv6 static IP configuration enabled by user [arg1]. - FQXSPNM4023I : IPv6 DHCP enabled by user [arg1].
IPv6 DHCP enabled by user [arg1]. - FQXSPNM4024I : IPv6 stateless auto-configuration enabled by user [arg1].
IPv6 stateless auto-configuration enabled by user [arg1]. - FQXSPNM4025I : IPv6 static IP configuration disabled by user [arg1].
IPv6 static IP configuration disabled by user [arg1]. - FQXSPNM4026I : IPv6 DHCP disabled by user [arg1].
IPv6 DHCP disabled by user [arg1]. - FQXSPNM4027I : IPv6 stateless auto-configuration disabled by user [arg1].
IPv6 stateless auto-configuration disabled by user [arg1]. - FQXSPNM4028I : ENET[[arg1]] IPv6-LinkLocal:HstName=[arg2], IP@=[arg3] ,Pref=[arg4].
ENET[[arg1]] IPv6-LinkLocal:HstName=[arg2], IP@=[arg3] ,Pref=[arg4]. - FQXSPNM4029I : ENET[[arg1]] IPv6-Static:HstName=[arg2], IP@=[arg3] ,Pref=[arg4], GW@=[arg5] .
ENET[[arg1]] IPv6-Static:HstName=[arg2], IP@=[arg3] ,Pref=[arg4], GW@=[arg5] . - FQXSPNM4030I : ENET[[arg1]] DHCPv6-HSTN=[arg2], DN=[arg3], IP@=[arg4], Pref=[arg5], DNS1@=[arg5].
ENET[[arg1]] DHCPv6-HSTN=[arg2], DN=[arg3], IP@=[arg4], Pref=[arg5], DNS1@=[arg5]. - FQXSPNM4031I : IPv6 static address of network interface modified from [arg1] to [arg2] by user [arg3].
IPv6 static address of network interface modified from [arg1] to [arg2] by user [arg3]. - FQXSPNM4032I : DHCPv6 failure, no IP address assigned.
DHCPv6 failure, no IP address assigned. - FQXSPNM4033I : Telnet port number changed from [arg1] to [arg2] by user [arg3].
Telnet port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4034I : SSH port number changed from [arg1] to [arg2] by user [arg3].
SSH port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4035I : Web-HTTP port number changed from [arg1] to [arg2] by user [arg3].
Web-HTTP port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4036I : Web-HTTPS port number changed from [arg1] to [arg2] by user [arg3].
Web-HTTPS port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4037I : CIM/XML HTTP port number changed from [arg1] to [arg2] by user [arg3].
CIM/XML HTTP port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4038I : CIM/XML HTTPS port number changed from [arg1] to [arg2] by user [arg3].
CIM/XML HTTPS port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4039I : SNMP Agent port number changed from [arg1] to [arg2] by user [arg3].
SNMP Agent port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4040I : SNMP Traps port number changed from [arg1] to [arg2] by user [arg3].
SNMP Traps port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4041I : Syslog port number changed from [arg1] to [arg2] by user [arg3].
Syslog port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4042I : Remote Presence port number changed from [arg1] to [arg2] by user [arg3].
Remote Presence port number changed from [arg1] to [arg2] by user [arg3]. - FQXSPNM4043I : SMTP Server set by user [arg1] to [arg2]:[arg3].
SMTP Server set by user [arg1] to [arg2]:[arg3]. - FQXSPNM4044I : Telnet [arg1] by user [arg2].
Telnet [arg1] by user [arg2]. - FQXSPNM4045I : DNS servers set by user [arg1]: UseAdditionalServers=[arg2], PreferredDNStype=[arg3], IPv4Server1=[arg4], IPv4Server2=[arg5], IPv4Server3=[arg6], IPv6Server1=[arg7], IPv6Server2=[arg8], IPv6Server3=[arg9].
DNS servers set by user [arg1]: UseAdditionalServers=[arg2], PreferredDNStype=[arg3], IPv4Server1=[arg4], IPv4Server2=[arg5], IPv4Server3=[arg6], IPv6Server1=[arg7], IPv6Server2=[arg8], IPv6Server3=[arg9]. - FQXSPNM4046I : LAN over USB [arg1] by user [arg2].
LAN over USB [arg1] by user [arg2]. - FQXSPNM4047I : LAN over USB Port Forwarding set by user [arg1]: ExternalPort=[arg2], USB-LAN port=[arg3].
LAN over USB Port Forwarding set by user [arg1]: ExternalPort=[arg2], USB-LAN port=[arg3]. - FQXSPNM4048I : PXE boot requested by user [arg1].
PXE boot requested by user [arg1]. - FQXSPNM4049I : User [arg1] has initiated a TKLM Server Connection Test to check connectivity to server [arg2].
User [arg1] has initiated a TKLM Server Connection Test to check connectivity to server [arg2]. - FQXSPNM4050I : User [arg1] has initiated an SMTP Server Connection Test.
User [arg1] has initiated an SMTP Server Connection Test. - FQXSPNM4051I : User [arg1] has set the SMTP Server reverse-path to [arg2].
User [arg1] has set the SMTP Server reverse-path to [arg2]. - FQXSPNM4052I : DHCP specified hostname is set to [arg1] by user [arg2].
DHCP specified hostname is set to [arg1] by user [arg2]. - FQXSPNM4053I : DNS discovery of Lenovo XClarity Administrator has been [arg1] by user [arg2].
DNS discovery of Lenovo XClarity Administrator has been [arg1] by user [arg2]. - FQXSPNM4054I : The hostname from DHCP is [arg1] by user [arg2].
The hostname from DHCP is [arg1] by user [arg2]. - FQXSPNM4055I : The hostname from DHCP is invalid.
The hostname from DHCP is invalid. - FQXSPNM4056I : The NTP server address [arg1] is invalid.
The NTP server address [arg1] is invalid. - FQXSPNM4057I : Security: IP address: [arg1] had [arg2] login failures, it will be blocked to access for [arg3] minutes.
Security: IP address: [arg1] had [arg2] login failures, it will be blocked to access for [arg3] minutes. - FQXSPNM4058I : IP address of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4].
IP address of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4]. - FQXSPNM4059I : IP subnet mask of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4].
IP subnet mask of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4]. - FQXSPNM4060I : IP address of default gateway of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4].
IP address of default gateway of network interface [arg1] is modified from [arg2] to [arg3] by user [arg4]. - FQXSPOS4000I : OS Watchdog response [arg1] by [arg2] .
OS Watchdog response [arg1] by [arg2] . - FQXSPOS4001I : Watchdog [arg1] Screen Capture Occurred .
Watchdog [arg1] Screen Capture Occurred . - FQXSPOS4002I : Watchdog [arg1] Failed to Capture Screen.
Watchdog [arg1] Failed to Capture Screen. - FQXSPOS4003I : Platform Watchdog Timer expired for [arg1].
Platform Watchdog Timer expired for [arg1]. - FQXSPOS4004I : Operating System status has changed to [arg1].
Operating System status has changed to [arg1]. - FQXSPOS4005I : Host Power-On password changed by user [arg1] from [arg2] at IP address [arg3].
Host Power-On password changed by user [arg1] from [arg2] at IP address [arg3]. - FQXSPOS4006I : Host Power-On password cleared by user [arg1] from [arg2] at IP address [arg3].
Host Power-On password cleared by user [arg1] from [arg2] at IP address [arg3]. - FQXSPOS4007I : Host Admin password changed by user [arg1] from [arg2] at IP address [arg3].
Host Admin password changed by user [arg1] from [arg2] at IP address [arg3]. - FQXSPOS4008I : Host Admin password cleared by user [arg1] from [arg2] at IP address [arg3].
Host Admin password cleared by user [arg1] from [arg2] at IP address [arg3]. - FQXSPOS4009I : OS Crash Video Captured.
OS Crash Video Captured. - FQXSPOS4010I : OS Crash Video Capture Failed.
OS Crash Video Capture Failed. - FQXSPOS4011I : OS failure screen capture with hardware error is [arg1] by user [arg2] from [arg3] at IP address [arg4].
OS failure screen capture with hardware error is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPOS4012I : POST watchdog Screen Capture Occurred.
POST watchdog Screen Capture Occurred. - FQXSPPP4000I : Attempting to [arg1] server [arg2] by user [arg3].
Attempting to [arg1] server [arg2] by user [arg3]. - FQXSPPP4001I : Server Power Off Delay set to [arg1] by user [arg2].
Server Power Off Delay set to [arg1] by user [arg2]. - FQXSPPP4002I : Server [arg1] scheduled for [arg2] at [arg3] by user [arg4].
Server [arg1] scheduled for [arg2] at [arg3] by user [arg4]. - FQXSPPP4003I : Server [arg1] scheduled for every [arg2] at [arg3] by user [arg4].
Server [arg1] scheduled for every [arg2] at [arg3] by user [arg4]. - FQXSPPP4004I : Server [arg1] [arg2] cleared by user [arg3].
Server [arg1] [arg2] cleared by user [arg3]. - FQXSPPP4005I : The power cap value changed from [arg1] watts to [arg2] watts by user [arg3].
The power cap value changed from [arg1] watts to [arg2] watts by user [arg3]. - FQXSPPP4006I : The minimum power cap value changed from [arg1] watts to [arg2] watts.
The minimum power cap value changed from [arg1] watts to [arg2] watts. - FQXSPPP4007I : The maximum power cap value changed from [arg1] watts to [arg2] watts.
The maximum power cap value changed from [arg1] watts to [arg2] watts. - FQXSPPP4008I : The soft minimum power cap value changed from [arg1] watts to [arg2] watts.
The soft minimum power cap value changed from [arg1] watts to [arg2] watts. - FQXSPPP4009I : The measured power value exceeded the power cap value.
The measured power value exceeded the power cap value. - FQXSPPP4010I : The new minimum power cap value exceeded the power cap value.
The new minimum power cap value exceeded the power cap value. - FQXSPPP4011I : Power capping was activated by user [arg1].
Power capping was activated by user [arg1]. - FQXSPPP4012I : Power capping was deactivated by user [arg1].
Power capping was deactivated by user [arg1]. - FQXSPPP4013I : Static Power Savings mode has been turned on by user [arg1].
Static Power Savings mode has been turned on by user [arg1]. - FQXSPPP4014I : Static Power Savings mode has been turned off by user [arg1].
Static Power Savings mode has been turned off by user [arg1]. - FQXSPPP4015I : Dynamic Power Savings mode has been turned on by user [arg1].
Dynamic Power Savings mode has been turned on by user [arg1]. - FQXSPPP4016I : Dynamic Power Savings mode has been turned off by user [arg1].
Dynamic Power Savings mode has been turned off by user [arg1]. - FQXSPPP4017I : Power cap and external throttling occurred.
Power cap and external throttling occurred. - FQXSPPP4018I : External throttling occurred .
External throttling occurred . - FQXSPPP4019I : Power cap throttling occurred.
Power cap throttling occurred. - FQXSPPP4020I : The measured power value has returned below the power cap value.
The measured power value has returned below the power cap value. - FQXSPPP4021I : The new minimum power cap value has returned below the power cap value.
The new minimum power cap value has returned below the power cap value. - FQXSPPP4022I : The server was restarted for an unknown reason.
The server was restarted for an unknown reason. - FQXSPPP4023I : The server is restarted by chassis control command.
The server is restarted by chassis control command. - FQXSPPP4024I : The server was reset via push button.
The server was reset via push button. - FQXSPPP4025I : The server was powered-up via power push button.
The server was powered-up via power push button. - FQXSPPP4026I : The server was restarted when the watchdog expired..
The server was restarted when the watchdog expired.. - FQXSPPP4027I : The server was restarted for OEM reason.
The server was restarted for OEM reason. - FQXSPPP4028I : The server was automatically powered on because the power restore policy is set to always on.
The server was automatically powered on because the power restore policy is set to always on. - FQXSPPP4029I : The server was automatically powered on because the power restore policy is set to restore previous power state..
The server was automatically powered on because the power restore policy is set to restore previous power state.. - FQXSPPP4030I : The server was reset via Platform Event Filter.
The server was reset via Platform Event Filter. - FQXSPPP4031I : The server was power-cycled via Platform Event Filter.
The server was power-cycled via Platform Event Filter. - FQXSPPP4032I : The server was soft reset.
The server was soft reset. - FQXSPPP4033I : The server was powered up via Real Time Clock (scheduled power on).
The server was powered up via Real Time Clock (scheduled power on). - FQXSPPP4034I : The server was powered off for an unknown reason.
The server was powered off for an unknown reason. - FQXSPPP4035I : The server was powered off by chassis control command.
The server was powered off by chassis control command. - FQXSPPP4036I : The server was powered off via push button.
The server was powered off via push button. - FQXSPPP4037I : The server was powered off when the watchdog expired.
The server was powered off when the watchdog expired. - FQXSPPP4038I : The server stayed powered off because the power restore policy is set to always off.
The server stayed powered off because the power restore policy is set to always off. - FQXSPPP4039I : The server stayed powered off because the power restore policy is set to restore previous power state..
The server stayed powered off because the power restore policy is set to restore previous power state.. - FQXSPPP4040I : The server was powered off via Platform Event Filter.
The server was powered off via Platform Event Filter. - FQXSPPP4041I : The server was powered off via Real Time Clock (scheduled power off).
The server was powered off via Real Time Clock (scheduled power off). - FQXSPPP4042I : Management Controller [arg1] reset was initiated due to Power-On-Reset.
Management Controller [arg1] reset was initiated due to Power-On-Reset. - FQXSPPP4043I : Management Controller [arg1] reset was initiated by PRESET.
Management Controller [arg1] reset was initiated by PRESET. - FQXSPPP4044I : Management Controller [arg1] reset was initiated by CMM.
Management Controller [arg1] reset was initiated by CMM. - FQXSPPP4045I : Management Controller [arg1] reset was initiated by XCC firmware.
Management Controller [arg1] reset was initiated by XCC firmware. - FQXSPPP4047I : Management Controller [arg1] reset was initiated by user [arg2].
Management Controller [arg1] reset was initiated by user [arg2]. - FQXSPPP4048I : Attempting to AC power cycle server [arg1] by user [arg2].
Attempting to AC power cycle server [arg1] by user [arg2]. - FQXSPPP4049I : Management Controller [arg1] reset was initiated by Front Panel.
Management Controller [arg1] reset was initiated by Front Panel. - FQXSPPP4050I : Management Controller [arg1] reset was initiated to activate PFR Firmware.
Management Controller [arg1] reset was initiated to activate PFR Firmware. - FQXSPPP4051I : The programmable GPU total power capping value in slot [arg1] is changed to [arg2] watts by user [arg3] from [arg4] at IP address [arg5].
The programmable GPU total power capping value in slot [arg1] is changed to [arg2] watts by user [arg3] from [arg4] at IP address [arg5]. - FQXSPPP4052I : The programmable GPU peak power capping value in slot [arg1] is changed to [arg2] watts by user [arg3] from [arg4] at IP address [arg5].
The programmable GPU peak power capping value in slot [arg1] is changed to [arg2] watts by user [arg3] from [arg4] at IP address [arg5]. - FQXSPPP4053I : This message is reserved.
This message is reserved. - FQXSPPP4054I : Unbalanced PSU config is detected, system is using less node PSU capacity.
Unbalanced PSU config is detected, system is using less node PSU capacity. - FQXSPPU0001N : An Over-Temperature Condition has been detected on [ProcessorElementName].
An Over-Temperature Condition has been detected on [ProcessorElementName]. - FQXSPPU0002G : The Processor [ProcessorElementName] is operating in a Degraded State.
The Processor [ProcessorElementName] is operating in a Degraded State. - FQXSPPU0003N : [ProcessorElementName] has Failed with IERR.
[ProcessorElementName] has Failed with IERR. - FQXSPPU0004M : [ProcessorElementName] has Failed with FRB1/BIST condition.
[ProcessorElementName] has Failed with FRB1/BIST condition. - FQXSPPU0009N : [ProcessorElementName] has a Configuration Mismatch.
[ProcessorElementName] has a Configuration Mismatch. - FQXSPPU0010G : The Processor [ProcessorElementName] is operating in a Degraded State due to [ProcessorElementName].
The Processor [ProcessorElementName] is operating in a Degraded State due to [ProcessorElementName]. - FQXSPPU0011N : An SM BIOS Uncorrectable CPU complex error for [ProcessorElementName] has asserted.
An SM BIOS Uncorrectable CPU complex error for [ProcessorElementName] has asserted. - FQXSPPU2001I : An Over-Temperature Condition has been removed on [ProcessorElementName].
An Over-Temperature Condition has been removed on [ProcessorElementName]. - FQXSPPU2002I : The Processor [ProcessorElementName] is no longer operating in a Degraded State.
The Processor [ProcessorElementName] is no longer operating in a Degraded State. - FQXSPPU2003I : [ProcessorElementName] has Recovered from IERR.
[ProcessorElementName] has Recovered from IERR. - FQXSPPU2004I : [ProcessorElementName] has Recovered from FRB1/BIST condition.
[ProcessorElementName] has Recovered from FRB1/BIST condition. - FQXSPPW0001I : [PowerSupplyElementName] has been added to container [PhysicalPackageElementName].
[PowerSupplyElementName] has been added to container [PhysicalPackageElementName]. - FQXSPPW0002L : [PowerSupplyElementName] has Failed.
[PowerSupplyElementName] has Failed. - FQXSPPW0003G : Failure predicted on [PowerSupplyElementName].
Failure predicted on [PowerSupplyElementName]. - FQXSPPW0005I : [PowerSupplyElementName] is operating in an Input State that is out of range.
[PowerSupplyElementName] is operating in an Input State that is out of range. - FQXSPPW0006I : [PowerSupplyElementName] has lost input.
[PowerSupplyElementName] has lost input. - FQXSPPW0007L : [PowerSupplyElementName] has a Configuration Mismatch.
[PowerSupplyElementName] has a Configuration Mismatch. - FQXSPPW0008I : [SensorElementName] has been turned off.
[SensorElementName] has been turned off. - FQXSPPW0009I : [PowerSupplyElementName] has been Power Cycled.
[PowerSupplyElementName] has been Power Cycled. - FQXSPPW0031J : Numeric sensor [NumericSensorElementName] going low (lower non-critical) has asserted.
Numeric sensor [NumericSensorElementName] going low (lower non-critical) has asserted. - FQXSPPW0035M : Numeric sensor [NumericSensorElementName] going low (lower critical) has asserted.
Numeric sensor [NumericSensorElementName] going low (lower critical) has asserted. - FQXSPPW0057J : Sensor [SensorElementName] has transitioned from normal to non-critical state.
Sensor [SensorElementName] has transitioned from normal to non-critical state. - FQXSPPW0061M : Sensor [SensorElementName] has transitioned to critical from a less severe state.
Sensor [SensorElementName] has transitioned to critical from a less severe state. - FQXSPPW0062M : Sensor [SensorElementName] has transitioned to critical from a less severe state.
Sensor [SensorElementName] has transitioned to critical from a less severe state. - FQXSPPW0063M : Sensor [SensorElementName] has transitioned to critical from a less severe state.
Sensor [SensorElementName] has transitioned to critical from a less severe state. - FQXSPPW2001I : [PowerSupplyElementName] has been removed from container [PhysicalPackageElementName].
[PowerSupplyElementName] has been removed from container [PhysicalPackageElementName]. - FQXSPPW2002I : [PowerSupplyElementName] has returned to OK status.
[PowerSupplyElementName] has returned to OK status. - FQXSPPW2003I : Failure no longer predicted on [PowerSupplyElementName].
Failure no longer predicted on [PowerSupplyElementName]. - FQXSPPW2006I : [PowerSupplyElementName] has returned to a Normal Input State.
[PowerSupplyElementName] has returned to a Normal Input State. - FQXSPPW2007I : [PowerSupplyElementName] Configuration is OK.
[PowerSupplyElementName] Configuration is OK. - FQXSPPW2008I : [PowerSupplyElementName] has been turned on.
[PowerSupplyElementName] has been turned on. - FQXSPPW2031I : Numeric sensor [NumericSensorElementName] going low (lower non-critical) has deasserted.
Numeric sensor [NumericSensorElementName] going low (lower non-critical) has deasserted. - FQXSPPW2035I : Numeric sensor [NumericSensorElementName] going low (lower critical) has deasserted.
Numeric sensor [NumericSensorElementName] going low (lower critical) has deasserted. - FQXSPPW2057I : Sensor [SensorElementName] has deasserted the transition from normal to non-critical state.
Sensor [SensorElementName] has deasserted the transition from normal to non-critical state. - FQXSPPW2061I : Sensor [SensorElementName] has transitioned to a less severe state from critical.
Sensor [SensorElementName] has transitioned to a less severe state from critical. - FQXSPPW2062I : Sensor [SensorElementName] has transitioned to a less severe state from critical.
Sensor [SensorElementName] has transitioned to a less severe state from critical. - FQXSPPW2063I : Sensor [SensorElementName] has transitioned to a less severe state from critical.
Sensor [SensorElementName] has transitioned to a less severe state from critical. - FQXSPPW4001I : PCIe Power Brake for [arg1] has been [arg2].
PCIe Power Brake for [arg1] has been [arg2]. - FQXSPPW4002I : Total graphics power value has exceeded the pre-configured limit.
Total graphics power value has exceeded the pre-configured limit. - FQXSPPW4003I : The customized total graphics power is within the pre-configured limit.
The customized total graphics power is within the pre-configured limit. - FQXSPSD0000I : The [StorageVolumeElementName] has been added.
The [StorageVolumeElementName] has been added. - FQXSPSD0001I : The [StorageVolumeElementName] Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has been added.
The [StorageVolumeElementName] Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has been added. - FQXSPSD0001L : The [StorageVolumeElementName] has a fault.
The [StorageVolumeElementName] has a fault. - FQXSPSD0002G : Failure Predicted on [StorageVolumeElementName] for array [ComputerSystemElementName].
Failure Predicted on [StorageVolumeElementName] for array [ComputerSystemElementName]. - FQXSPSD0002L : Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has a fault.
Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has a fault. - FQXSPSD0003G : Failure Predicted on drive [arg1] in the enclosure/chassis (MTM-SN: [arg2]).
Failure Predicted on drive [arg1] in the enclosure/chassis (MTM-SN: [arg2]). - FQXSPSD0003I : Hot Spare enabled for [ComputerSystemElementName].
Hot Spare enabled for [ComputerSystemElementName]. - FQXSPSD0005I : Hot Spare enabled for drive [arg1] in the enclosure/chassis (MTM-SN: [arg2]).
Hot Spare enabled for drive [arg1] in the enclosure/chassis (MTM-SN: [arg2]). - FQXSPSD0005L : Array [ComputerSystemElementName] is in critical condition.
Array [ComputerSystemElementName] is in critical condition. - FQXSPSD0006L : Array [ComputerSystemElementName] has failed.
Array [ComputerSystemElementName] has failed. - FQXSPSD0007I : Rebuild in progress for Array in system [ComputerSystemElementName].
Rebuild in progress for Array in system [ComputerSystemElementName]. - FQXSPSD0007L : Array critical asserted on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]).
Array critical asserted on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]). - FQXSPSD0008I : Array rebuild in progress on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]).
Array rebuild in progress on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]). - FQXSPSD0008L : Array failed on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]).
Array failed on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]). - FQXSPSD2000I : The [StorageVolumeElementName] has been removed from unit [PhysicalPackageElementName].
The [StorageVolumeElementName] has been removed from unit [PhysicalPackageElementName]. - FQXSPSD2001I : The [StorageVolumeElementName] has recovered from a fault.
The [StorageVolumeElementName] has recovered from a fault. - FQXSPSD2002I : Failure no longer Predicted on [StorageVolumeElementName] for array [ComputerSystemElementName].
Failure no longer Predicted on [StorageVolumeElementName] for array [ComputerSystemElementName]. - FQXSPSD2003I : Hot spare disabled for [ComputerSystemElementName].
Hot spare disabled for [ComputerSystemElementName]. - FQXSPSD2005I : Critical Array [ComputerSystemElementName] has deasserted.
Critical Array [ComputerSystemElementName] has deasserted. - FQXSPSD2006I : Array in system [ComputerSystemElementName] has been restored.
Array in system [ComputerSystemElementName] has been restored. - FQXSPSD2007I : Rebuild completed for Array in system [ComputerSystemElementName].
Rebuild completed for Array in system [ComputerSystemElementName]. - FQXSPSD2008I : Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has recovered from a fault.
Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has recovered from a fault. - FQXSPSD2010I : Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has been removed.
Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has been removed. - FQXSPSD2011I : Failure no longer Predicted on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]).
Failure no longer Predicted on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]). - FQXSPSD2012I : Hot Spare disabled for drive [arg1] in the enclosure/chassis (MTM-SN: [arg2]).
Hot Spare disabled for drive [arg1] in the enclosure/chassis (MTM-SN: [arg2]). - FQXSPSD2013I : Array critical deasserted on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]).
Array critical deasserted on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]). - FQXSPSD2014I : Array restored on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]).
Array restored on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]). - FQXSPSD2015I : Array rebuild completed on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]).
Array rebuild completed on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]). - FQXSPSE4000I : Certificate Authority [arg1] has detected a [arg2] Certificate Error.
Certificate Authority [arg1] has detected a [arg2] Certificate Error. - FQXSPSE4001I : Remote Login Successful. Login ID: [arg1] using [arg2] from [arg3] at IP address [arg4].
Remote Login Successful. Login ID: [arg1] using [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4002I : Security: Userid: [arg1] using [arg2] had [arg3] login failures from WEB client at IP address [arg4].
Security: Userid: [arg1] using [arg2] had [arg3] login failures from WEB client at IP address [arg4]. - FQXSPSE4003I : Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3].
Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3]. - FQXSPSE4004I : Remote access attempt failed. Invalid userid or password received. Userid is [arg1] from WEB browser at IP address [arg2].
Remote access attempt failed. Invalid userid or password received. Userid is [arg1] from WEB browser at IP address [arg2]. - FQXSPSE4005I : Remote access attempt failed. Invalid userid or password received. Userid is [arg1] from TELNET client at IP address [arg2].
Remote access attempt failed. Invalid userid or password received. Userid is [arg1] from TELNET client at IP address [arg2]. - FQXSPSE4006I : XCC detected an invalid SSL certificate in the Management Controller [arg1] .
XCC detected an invalid SSL certificate in the Management Controller [arg1] . - FQXSPSE4007I : Security: Userid: [arg1] using [arg2] had [arg3] login failures from an SSH client at IP address [arg4].
Security: Userid: [arg1] using [arg2] had [arg3] login failures from an SSH client at IP address [arg4]. - FQXSPSE4008I : SNMPv1 [arg1] set by user [arg2]: Name=[arg3], AccessType=[arg4], Address=[arg5], .
SNMPv1 [arg1] set by user [arg2]: Name=[arg3], AccessType=[arg4], Address=[arg5], . - FQXSPSE4009I : LDAP Server configuration set by user [arg1]: SelectionMethod=[arg2], DomainName=[arg3], Server1=[arg4], Server2=[arg5], Server3=[arg6], Server4=[arg7].
LDAP Server configuration set by user [arg1]: SelectionMethod=[arg2], DomainName=[arg3], Server1=[arg4], Server2=[arg5], Server3=[arg6], Server4=[arg7]. - FQXSPSE4010I : LDAP set by user [arg1]: RootDN=[arg2], UIDSearchAttribute=[arg3], BindingMethod=[arg4], EnhancedRBS=[arg5], TargetName=[arg6], GroupFilter=[arg7], GroupAttribute=[arg8], LoginAttribute=[arg9].
LDAP set by user [arg1]: RootDN=[arg2], UIDSearchAttribute=[arg3], BindingMethod=[arg4], EnhancedRBS=[arg5], TargetName=[arg6], GroupFilter=[arg7], GroupAttribute=[arg8], LoginAttribute=[arg9]. - FQXSPSE4011I : Secure Web services (HTTPS) [arg1] by user [arg2].
Secure Web services (HTTPS) [arg1] by user [arg2]. - FQXSPSE4012I : Secure CIM/XML(HTTPS) [arg1] by user [arg2].
Secure CIM/XML(HTTPS) [arg1] by user [arg2]. - FQXSPSE4013I : Secure LDAP [arg1] by user [arg2].
Secure LDAP [arg1] by user [arg2]. - FQXSPSE4014I : SSH [arg1] by user [arg2].
SSH [arg1] by user [arg2]. - FQXSPSE4015I : Global Login General Settings set by user [arg1]: AuthenticationMethod=[arg2], LockoutPeriod=[arg3], SessionTimeout=[arg4].
Global Login General Settings set by user [arg1]: AuthenticationMethod=[arg2], LockoutPeriod=[arg3], SessionTimeout=[arg4]. - FQXSPSE4016I : Global Login Account Security set by user [arg1]: PasswordRequired=[arg2], PasswordExpirationPeriod=[arg3], MinimumPasswordReuseCycle=[arg4], MinimumPasswordLength=[arg5], MinimumPasswordChangeInterval=[arg6], MaxmumLoginFailures=[arg7], LockoutAfterMaxFailures=[arg8].
Global Login Account Security set by user [arg1]: PasswordRequired=[arg2], PasswordExpirationPeriod=[arg3], MinimumPasswordReuseCycle=[arg4], MinimumPasswordLength=[arg5], MinimumPasswordChangeInterval=[arg6], MaxmumLoginFailures=[arg7], LockoutAfterMaxFailures=[arg8]. - FQXSPSE4017I : User [arg1] created.
User [arg1] created. - FQXSPSE4018I : User [arg1] removed.
User [arg1] removed. - FQXSPSE4019I : User [arg1] password modified.
User [arg1] password modified. - FQXSPSE4020I : User [arg1] role set to [arg2].
User [arg1] role set to [arg2]. - FQXSPSE4021I : User [arg1] custom privileges set: [arg2][arg3][arg4][arg5][arg6][arg7][arg8][arg9].
User [arg1] custom privileges set: [arg2][arg3][arg4][arg5][arg6][arg7][arg8][arg9]. - FQXSPSE4022I : User [arg1] for SNMPv3 set: AuthenticationProtocol=[arg2], PrivacyProtocol=[arg3], AccessType=[arg4], HostforTraps=[arg5] by user [arg6] from [arg7] at IP address [arg8].
User [arg1] for SNMPv3 set: AuthenticationProtocol=[arg2], PrivacyProtocol=[arg3], AccessType=[arg4], HostforTraps=[arg5] by user [arg6] from [arg7] at IP address [arg8]. - FQXSPSE4023I : SSH Client key added for user [arg1] by user [arg2] from [arg3] at IP address [arg4].
SSH Client key added for user [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4024I : SSH Client key imported for user [arg1] from [arg2] by user [arg3] from [arg4] at IP address [arg5].
SSH Client key imported for user [arg1] from [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4025I : SSH Client key removed from user [arg1] by user [arg2] from [arg3] at IP address [arg4].
SSH Client key removed from user [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4026I : Security: Userid: [arg1] had [arg2] login failures from a CIM client at IP address [arg3].
Security: Userid: [arg1] had [arg2] login failures from a CIM client at IP address [arg3]. - FQXSPSE4027I : Remote access attempt failed. Invalid userid or password received. Userid is [arg1] from a CIM client at IP address [arg2].
Remote access attempt failed. Invalid userid or password received. Userid is [arg1] from a CIM client at IP address [arg2]. - FQXSPSE4028I : Security: Userid: [arg1] had [arg2] login failures from IPMI client at IP address [arg3].
Security: Userid: [arg1] had [arg2] login failures from IPMI client at IP address [arg3]. - FQXSPSE4029I : Security: Userid: [arg1] had [arg2] login failures from SNMP client at IP address [arg3].
Security: Userid: [arg1] had [arg2] login failures from SNMP client at IP address [arg3]. - FQXSPSE4030I : Security: Userid: [arg1] had [arg2] login failures from IPMI serial client.
Security: Userid: [arg1] had [arg2] login failures from IPMI serial client. - FQXSPSE4031I : Remote Login Successful. Login ID: [arg1] from [arg2] serial interface.
Remote Login Successful. Login ID: [arg1] from [arg2] serial interface. - FQXSPSE4032I : Login ID: [arg1] from [arg2] at IP address [arg3] has logged off.
Login ID: [arg1] from [arg2] at IP address [arg3] has logged off. - FQXSPSE4033I : Login ID: [arg1] from [arg2] at IP address [arg3] has been logged off.
Login ID: [arg1] from [arg2] at IP address [arg3] has been logged off. - FQXSPSE4034I : User [arg1] has removed a certificate.
User [arg1] has removed a certificate. - FQXSPSE4035I : A certificate has been revoked .
A certificate has been revoked . - FQXSPSE4036I : The [arg1] certificate is expired and has been removed.
The [arg1] certificate is expired and has been removed. - FQXSPSE4037I : Crypto mode modified from [arg1] to [arg2] by user [arg3].
Crypto mode modified from [arg1] to [arg2] by user [arg3]. - FQXSPSE4038I : Minimum TLS level modified from [arg1] to [arg2] by user [arg3].
Minimum TLS level modified from [arg1] to [arg2] by user [arg3]. - FQXSPSE4039I : Temporary user account [arg1] is created by inband tool.
Temporary user account [arg1] is created by inband tool. - FQXSPSE4040I : Temporary user account [arg1] expires.
Temporary user account [arg1] expires. - FQXSPSE4041I : Security: Userid: [arg1] had [arg2] login failures from a SFTP client at IP address [arg3].
Security: Userid: [arg1] had [arg2] login failures from a SFTP client at IP address [arg3]. - FQXSPSE4042I : The third-party password function [arg1] by user [arg2] from [arg3] at IP address [arg4].
The third-party password function [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4043I : Retrieving the third-party password [arg1] by user [arg2] from [arg3] at IP address [arg4].
Retrieving the third-party password [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4044I : User [arg1] third-party hashed password has been [arg2] by user [arg3] from [arg4] at IP address [arg5].
User [arg1] third-party hashed password has been [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4045I : The Salt of user [arg1] third-party password has been [arg2] by user [arg3] from [arg4] at IP address [arg5].
The Salt of user [arg1] third-party password has been [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4046I : The third-party password of the user [arg1] has been retrieved by user [arg2] from [arg3] at IP address [arg4].
The third-party password of the user [arg1] has been retrieved by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4047I : Role [arg1] is [arg2] and assigned with custom privileges [arg3][arg4][arg5][arg6][arg7][arg8][arg9][arg10][arg11] by user [arg12] .
Role [arg1] is [arg2] and assigned with custom privileges [arg3][arg4][arg5][arg6][arg7][arg8][arg9][arg10][arg11] by user [arg12] . - FQXSPSE4048I : Role [arg1] is removed by user [arg2].
Role [arg1] is removed by user [arg2]. - FQXSPSE4049I : Role [arg1] is assigned to user [arg2] by user [arg3].
Role [arg1] is assigned to user [arg2] by user [arg3]. - FQXSPSE4050I : [arg1] sent IPMI command from [arg2], raw data: [arg3][arg4][arg5].
[arg1] sent IPMI command from [arg2], raw data: [arg3][arg4][arg5]. - FQXSPSE4051I : Management Controller [arg1] joined the neighbor group [arg2] by user [arg3] at IP address [arg4].
Management Controller [arg1] joined the neighbor group [arg2] by user [arg3] at IP address [arg4]. - FQXSPSE4052I : The password of neighbor group [arg1] is modified by [arg2] [arg3] at IP address [arg4].
The password of neighbor group [arg1] is modified by [arg2] [arg3] at IP address [arg4]. - FQXSPSE4053I : Management Controller [arg1] left the neighbor group [arg2] by user [arg3] at IP address [arg4].
Management Controller [arg1] left the neighbor group [arg2] by user [arg3] at IP address [arg4]. - FQXSPSE4054I : IPMI SEL wrapping mode is [arg1] by user [arg2] at IP address [arg3].
IPMI SEL wrapping mode is [arg1] by user [arg2] at IP address [arg3]. - FQXSPSE4055I : SED encryption is enabled by user [arg1] at IP address [arg2].
SED encryption is enabled by user [arg1] at IP address [arg2]. - FQXSPSE4056I : SED AK is [arg1] by user [arg2] at IP address [arg3].
SED AK is [arg1] by user [arg2] at IP address [arg3]. - FQXSPSE4057I : User [arg1] created by user [arg2] from [arg3] at IP address [arg4].
User [arg1] created by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4058I : User [arg1] removed by user [arg2] from [arg3] at IP address [arg4].
User [arg1] removed by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4059I : User [arg1] password modified by user [arg2] from [arg3] at IP address [arg4].
User [arg1] password modified by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4060I : User [arg1] role set to [arg2] by user [arg3] from [arg4] at IP address [arg5].
User [arg1] role set to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4061I : User [arg1] custom privileges set: [arg2][arg3][arg4][arg5][arg6][arg7][arg8][arg9] by user [arg10] from [arg11] at IP address [arg12].
User [arg1] custom privileges set: [arg2][arg3][arg4][arg5][arg6][arg7][arg8][arg9] by user [arg10] from [arg11] at IP address [arg12]. - FQXSPSE4062I : The system guard snapshot is captured by user [arg1] from [arg2] at IP address [arg3].
The system guard snapshot is captured by user [arg1] from [arg2] at IP address [arg3]. - FQXSPSE4063I : The system guard configuration is updated: status=[arg1], hardware inventory=[arg2] and action=[arg3] by user [arg4] from [arg5] at IP address [arg6].
The system guard configuration is updated: status=[arg1], hardware inventory=[arg2] and action=[arg3] by user [arg4] from [arg5] at IP address [arg6]. - FQXSPSE4064I : SNMPv3 engine ID is changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
SNMPv3 engine ID is changed from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4065I : SFTP [arg1] by user [arg2] from [arg3] at IP address [arg4].
SFTP [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4066I : Security mode is modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5].
Security mode is modified from [arg1] to [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4067I : User [arg1] accessible interfaces is set to [arg2][arg3][arg4][arg5][arg6] by user [arg7] from [arg8] at IP address [arg9].
User [arg1] accessible interfaces is set to [arg2][arg3][arg4][arg5][arg6] by user [arg7] from [arg8] at IP address [arg9]. - FQXSPSE4068I : Security: Userid: [arg1] using [arg2] had [arg3] login failures from Redfish client at IP address [arg4].
Security: Userid: [arg1] using [arg2] had [arg3] login failures from Redfish client at IP address [arg4]. - FQXSPSE4069I : LDAP set by user [arg1]: RootDN=[arg2], UIDSearchAttribute=[arg3], BindingMethod=[arg4], TargetName=[arg5], GroupFilter=[arg6], GroupAttribute=[arg7], LoginAttribute=[arg8].
LDAP set by user [arg1]: RootDN=[arg2], UIDSearchAttribute=[arg3], BindingMethod=[arg4], TargetName=[arg5], GroupFilter=[arg6], GroupAttribute=[arg7], LoginAttribute=[arg8]. - FQXSPSE4070I : Lockdown mode is [arg1] by user [arg2] from [arg3] at IP address [arg4].
Lockdown mode is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4071I : Chassis Intrusion detection is [arg1] by user [arg2] from [arg3] at IP address [arg4].
Chassis Intrusion detection is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4072I : Random SED AK is regenerated by user [arg1] from [arg2] at IP address [arg3].
Random SED AK is regenerated by user [arg1] from [arg2] at IP address [arg3]. - FQXSPSE4073I : Motion detection is [arg1] by user [arg2] from [arg3] at IP address [arg4].
Motion detection is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4074I : Security mode downgrades because the XCC2 Platinum Upgrade key is expired or deleted.
Security mode downgrades because the XCC2 Platinum Upgrade key is expired or deleted. - FQXSPSE4075I : [arg1] by KCS to allow secure boot to be enabled by user [arg2] from [arg3] at IP address [arg4].
[arg1] by KCS to allow secure boot to be enabled by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4076I : [arg1] by KCS to allow secure boot to be disabled by user [arg2] from [arg3] at IP address [arg4].
[arg1] by KCS to allow secure boot to be disabled by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4077I : Bluetooth button on front panel is [arg1] on server [arg2] by user [arg3] from [arg4] at IP address [arg5].
Bluetooth button on front panel is [arg1] on server [arg2] by user [arg3] from [arg4] at IP address [arg5]. - FQXSPSE4078I : Bluetooth is [arg1] by pressing bluetooth button on front panel.
Bluetooth is [arg1] by pressing bluetooth button on front panel. - FQXSPSE4079I : The Operator role is [arg1] to contain Remote Console Access permission by user [arg2] from [arg3] at IP address [arg4].
The Operator role is [arg1] to contain Remote Console Access permission by user [arg2] from [arg3] at IP address [arg4]. - FQXSPSE4080I : The user [arg1] attempts to clear CMOS from [arg2] at IP address [arg4].
The user [arg1] attempts to clear CMOS from [arg2] at IP address [arg4]. - FQXSPSE4081I : BMC returns the valid local cached key to UEFI for SED drives.
BMC returns the valid local cached key to UEFI for SED drives. - FQXSPSE4082I : Remote key management server is unaccessable.
Remote key management server is unaccessable. - FQXSPSE4083I : The local cached key has expired and destroyed it.
The local cached key has expired and destroyed it. - FQXSPSE4084I : Periodic connection to remote key management server succeeded.
Periodic connection to remote key management server succeeded. - FQXSPSE4085I : Periodic connection to remote key management server failed.
Periodic connection to remote key management server failed. - FQXSPSE4088I : The chassis caretaker node ID is changed from [arg1] to [arg2].
The chassis caretaker node ID is changed from [arg1] to [arg2]. - FQXSPSE4089I : The chassis node with node ID [arg1] is inserted.
The chassis node with node ID [arg1] is inserted. - FQXSPSE4090I : The chassis node with node ID [arg1] is removed.
The chassis node with node ID [arg1] is removed. - FQXSPSR0001N : Sensor [SensorElementName] has transitioned to non-recoverable from a less severe state.
Sensor [SensorElementName] has transitioned to non-recoverable from a less severe state. - FQXSPSR2001I : Sensor [SensorElementName] has deasserted the transition to non-recoverable from a less severe state.
Sensor [SensorElementName] has deasserted the transition to non-recoverable from a less severe state. - FQXSPSS4000I : Management Controller Test Alert Generated by [arg1].
Management Controller Test Alert Generated by [arg1]. - FQXSPSS4001I : Server General Settings set by user [arg1]: Name=[arg2], Contact=[arg3], Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-position=[arg7], Address=[arg8].
Server General Settings set by user [arg1]: Name=[arg2], Contact=[arg3], Location=[arg4], Room=[arg5], RackID=[arg6], Rack U-position=[arg7], Address=[arg8]. - FQXSPSS4002I : License key for [arg1] added by user [arg2].
License key for [arg1] added by user [arg2]. - FQXSPSS4003I : License key for [arg1] removed by user [arg2].
License key for [arg1] removed by user [arg2]. - FQXSPSS4004I : Test Call Home Generated by user [arg1].
Test Call Home Generated by user [arg1]. - FQXSPSS4005I : Manual Call Home by user [arg1]: [arg2].
Manual Call Home by user [arg1]: [arg2]. - FQXSPSS4006I : Call Home to [arg1] failed to complete: [arg2].
Call Home to [arg1] failed to complete: [arg2]. - FQXSPSS4007I : The BMC functionality tier is changed from [arg1] to [arg2].
The BMC functionality tier is changed from [arg1] to [arg2]. - FQXSPSS4008I : The [arg1] setting has been changed to [arg2] by user [arg3].
The [arg1] setting has been changed to [arg2] by user [arg3]. - FQXSPSS4009I : System enters LXPM maintenance mode.
System enters LXPM maintenance mode. - FQXSPSS4010I : Test Audit Log generated by user [arg1].
Test Audit Log generated by user [arg1]. - FQXSPSS4011I : Fan speed boost setting is changed from [arg1] to [arg2].
Fan speed boost setting is changed from [arg1] to [arg2]. - FQXSPTR4000I : Management Controller [arg1] clock has been set from NTP server [arg2].
Management Controller [arg1] clock has been set from NTP server [arg2]. - FQXSPTR4001I : Date and Time set by user [arg1]: Date=[arg2], Time-[arg3], DST Auto-adjust=[arg4], Timezone=[arg5].
Date and Time set by user [arg1]: Date=[arg2], Time-[arg3], DST Auto-adjust=[arg4], Timezone=[arg5]. - FQXSPTR4002I : Synchronize time setting by user [arg1]: Mode=Sync with NTP Server, NTPServerHost1=[arg2]:[arg3],NTPServerHost2=[arg4]:[arg5],NTPServerHost3=[arg6]:[arg7],NTPServerHost4=[arg8]:[arg9],NTPUpdateFrequency=[arg10].
Synchronize time setting by user [arg1]: Mode=Sync with NTP Server, NTPServerHost1=[arg2]:[arg3],NTPServerHost2=[arg4]:[arg5],NTPServerHost3=[arg6]:[arg7],NTPServerHost4=[arg8]:[arg9],NTPUpdateFrequency=[arg10]. - FQXSPTR4003I : Synchronize time setting by user [arg1]: Mode=Sync with server clock.
Synchronize time setting by user [arg1]: Mode=Sync with server clock. - FQXSPUN0009G : Sensor [SensorElementName] has asserted.
Sensor [SensorElementName] has asserted. - FQXSPUN0017I : Sensor [SensorElementName] has transitioned to normal state.
Sensor [SensorElementName] has transitioned to normal state. - FQXSPUN0018J : Sensor [SensorElementName] has transitioned from normal to non-critical state.
Sensor [SensorElementName] has transitioned from normal to non-critical state. - FQXSPUN0019M : Sensor [SensorElementName] has transitioned to critical from a less severe state.
Sensor [SensorElementName] has transitioned to critical from a less severe state. - FQXSPUN0023N : Sensor [SensorElementName] has transitioned to non-recoverable.
Sensor [SensorElementName] has transitioned to non-recoverable. - FQXSPUN0026I : Device [LogicalDeviceElementName] has been added.
Device [LogicalDeviceElementName] has been added. - FQXSPUN0048I : The RAID controller in PCI slot [arg1] in optimal status.
The RAID controller in PCI slot [arg1] in optimal status. - FQXSPUN2009I : Sensor [SensorElementName] has deasserted.
Sensor [SensorElementName] has deasserted. - FQXSPUN2012I : Sensor [SensorElementName] has deasserted.
Sensor [SensorElementName] has deasserted. - FQXSPUN2018I : Sensor [SensorElementName] has deasserted the transition from normal to non-critical state.
Sensor [SensorElementName] has deasserted the transition from normal to non-critical state. - FQXSPUN2019I : Sensor [SensorElementName] has transitioned to a less severe state from critical.
Sensor [SensorElementName] has transitioned to a less severe state from critical. - FQXSPUN2023I : Sensor [SensorElementName] has deasserted the transition to non-recoverable.
Sensor [SensorElementName] has deasserted the transition to non-recoverable. - FQXSPUN2049I : The RAID controller in PCI slot [arg1] is no longer in warning status.
The RAID controller in PCI slot [arg1] is no longer in warning status. - FQXSPUN2050I : The RAID controller in PCI slot [arg1] is no longer in critical status.
The RAID controller in PCI slot [arg1] is no longer in critical status. - FQXSPUP0002I : A firmware or software change occurred on system [ComputerSystemElementName].
A firmware or software change occurred on system [ComputerSystemElementName]. - FQXSPUP0007L : Invalid or Unsupported firmware or software was detected on system [ComputerSystemElementName].
Invalid or Unsupported firmware or software was detected on system [ComputerSystemElementName]. - FQXSPUP4000I : Please ensure that the Management Controller [arg1] is flashed with the correct firmware. The Management Controller is unable to match its firmware to the server.
Please ensure that the Management Controller [arg1] is flashed with the correct firmware. The Management Controller is unable to match its firmware to the server. - FQXSPUP4001I : Flash of [arg1] from [arg2] succeeded for user [arg3] .
Flash of [arg1] from [arg2] succeeded for user [arg3] . - FQXSPUP4002I : Flash of [arg1] from [arg2] failed for user [arg3].
Flash of [arg1] from [arg2] failed for user [arg3]. - FQXSPUP4003I : [arg1] firmware mismatch internal to system [arg2]. Please attempt to flash the [arg3] firmware.
[arg1] firmware mismatch internal to system [arg2]. Please attempt to flash the [arg3] firmware. - FQXSPUP4004I : XCC firmware mismatch between nodes/servers [arg1] and [arg2]. Please attempt to flash the XCC firmware to the same level on all nodes/servers.
XCC firmware mismatch between nodes/servers [arg1] and [arg2]. Please attempt to flash the XCC firmware to the same level on all nodes/servers. - FQXSPUP4005I : FPGA firmware mismatch between nodes/servers [arg1] and [arg2]. Please attempt to flash the FPGA firmware to the same level on all nodes/servers.
FPGA firmware mismatch between nodes/servers [arg1] and [arg2]. Please attempt to flash the FPGA firmware to the same level on all nodes/servers. - FQXSPUP4006I : Auto promote primary XCC to backup is [arg1] by user [arg2] from [arg3] at IP address [arg4].
Auto promote primary XCC to backup is [arg1] by user [arg2] from [arg3] at IP address [arg4]. - FQXSPUP4007I : Violation access to XCC SPI flash is detected and isolated.
Violation access to XCC SPI flash is detected and isolated. - FQXSPUP4008I : Violation access to UEFI SPI flash is detected and isolated.
Violation access to UEFI SPI flash is detected and isolated. - FQXSPUP4009I : Please ensure that the system is flashed with the correct [arg1] firmware. The Management Controller is unable to match the firmware to the server.
Please ensure that the system is flashed with the correct [arg1] firmware. The Management Controller is unable to match the firmware to the server. - FQXSPUP4010I : Flash [arg1] of [arg2] from [arg3] succeeded for user [arg4] .
Flash [arg1] of [arg2] from [arg3] succeeded for user [arg4] . - FQXSPUP4011I : Flash [arg1] of [arg2] from [arg3] failed for user [arg4].
Flash [arg1] of [arg2] from [arg3] failed for user [arg4]. - FQXSPWD0000I : Watchdog Timer expired for [WatchdogElementName].
Watchdog Timer expired for [WatchdogElementName]. - FQXSPWD0001I : Reboot of system [ComputerSystemElementName] initiated by watchdog [WatchdogElementName].
Reboot of system [ComputerSystemElementName] initiated by watchdog [WatchdogElementName]. - FQXSPWD0002I : Powering off system [ComputerSystemElementName] initiated by watchdog [WatchdogElementName].
Powering off system [ComputerSystemElementName] initiated by watchdog [WatchdogElementName]. - FQXSPWD0003I : Power cycle of system [ComputerSystemElementName] initiated by watchdog [WatchdogElementName].
Power cycle of system [ComputerSystemElementName] initiated by watchdog [WatchdogElementName]. - FQXSPWD0004I : Watchdog Timer interrupt occurred for [WatchdogElementName].
Watchdog Timer interrupt occurred for [WatchdogElementName].
Give documentation feedback