Assert Physical Presence
Before you can assert Physical Presence, the Physical Presence Policy must be enabled. By default, the Physical Presence Policy is enabled with a timeout of 30 minutes.
If the Physical Presence Policy is enabled, you can assert Physical Presence through the Lenovo XClarity Provisioning Manager or through the Lenovo XClarity Controller.
Switch the hardware jumpers on the system board.
Set the hardware Physical Presence jumper on the system board to assert Physical Presence.
Enable the Physical Presence Policy using either F1 (UEFI Settings) or Lenovo XClarity Essentials OneCLI.
Assert Physical Presence through the Lenovo XClarity Controller
Log in to the Lenovo XClarity Controller interface.
For information about logging in to the Lenovo XClarity Controller, see the
Opening and Using the XClarity Controller Web Interfacesection in the XCC documentation version compatible with your server at Lenovo XClarity Controller portal page.
Click assert.and verify that Physical Presence is set to