Skip to main content

Install the MicroSD card

Follow instructions in this section to install the MicroSD card.

About this task

S002
disconnect all power
CAUTION
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
Attention

  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

  1. Locate the MicroSD socket on the system board. See System-board connectors.
  2. Install the MicroSD card.
    1. Place the MicroSD card into the socket.
    2. Close the socket lid.
    3. Slide the socket lid to the lock position.
    Figure 1. Installing the MicroSD card

After this task is completed

Complete the parts replacement. See Complete the parts replacement.

Demo Video

Watch the procedure on YouTube