Node component replacement
Follow instructions in this section to remove and install the node components.
- 7mm hot-swap drive replacement
Follow instructions in this section to remove and install a 7mm hot-swap drive. - Air baffle and air flow sensor board replacement
Follow instructions in this section to remove and install the air baffles and the air flow sensor board. - Bluetooth antenna replacement
Follow instructions in this section to remove and install the Bluetooth antenna. - Bottom M.2 cabled adapter and M.2 drive replacement
Follow instructions in this section to remove and install the bottom M.2 cabled adapter and M.2 drives. - CMOS battery (CR2032) replacement
Follow instructions in this section to remove and install a CMOS battery (CR2032). - Fan direction switch with cable replacement
Follow instructions in this section to remove and install the fan direction switch with cable. - Fan module replacement
Follow instructions in this section to remove and install a fan module. - Front operator panel replacement
Follow instructions in this section to remove and install the front operator panel. - Internal power supply unit (AC PMB) replacement
Follow instructions in this section to remove and install the internal power supply unit (AC PMB). - Intrusion switch with cable replacement
Follow instructions in this section to remove and install the intrusion switch with cable. - I/O module board and M.2 boot drive replacement
Follow instructions in this section to remove and install the I/O module board and M.2 boot drives. - Kensington lock replacement
Follow instructions in this section to remove and install the Kensington lock. - Lock position switch with cable replacement
Follow instructions in this section to remove and install the lock position switch with cable. - M.2 heat sink replacement
Follow instructions in this section to remove and install an M.2 heat sink. - Memory module replacement
Follow instructions in this section to remove and install a memory module. - MicroSD card replacement
Follow instructions in this section to remove and install the MicroSD card. - Node cover replacement
Follow instructions in this section to remove and install the node covers. - PMB status LED cable replacement
Follow instructions in this section to remove and install the PMB status LED cable. - Power input board (PIB) module replacement
Follow instructions in this section to remove and install the power input board (PIB) module. - Power module board (PMB) replacement
Follow instructions in this section to remove and install the power module board (PMB). - Processor heat sink replacement
Follow instructions in this section to remove and install the processor heat sink. - Rear operator panel replacement
Follow instructions in this section to remove and install the rear operator panel. - Riser assembly replacement
Follow instructions in this section to remove and install the riser assembly. - Rubber feet replacement
Follow instructions in this section to remove and install the rubber feet. - System board replacement (trained technician only)
Follow instructions in this section to remove and install the system board. - Wireless adapter and WLAN/Bluetooth module replacement
Follow instructions in this section to remove and install the wireless adapter and WLAN/Bluetooth modules. - WLAN antenna and SMA assembly replacement
Follow instructions in this section to remove and install the WLAN antennas and SMA assemblies.
Give documentation feedback