FQXSPCA0009M : Numeric sensor [NumericSensorElementName] going high (upper critical) has asserted.
Numeric sensor [NumericSensorElementName] going high (upper critical) has asserted.
This message is for the use case when an implementation has detected an Upper Critical sensor going high has asserted.
Severity
Error
Alert Category
Critical - Temperature
Serviceable
Yes
SNMP Trap ID
0
Automatically Notify Support
No
User Action
Complete the following steps:
- Check XClarity Controller GUI for any fan or cooling-related issues or power-related issues.
- Ensure the room temperature is within operating specifications.
- Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place, clean, and correctly installed.
- Make sure the heat sink and GPU fillers in air baffle are installed corresponding to the system configuration.
- Replace the dust filter in the security bezel if applicable.
- Please contact Lenovo support.
Give documentation feedback