Skip to main content

Set dust filter measurement

With air flow sensor board installed, SE455 V3 BMC supports dust filter measurement to check the status of the dust filter.

Log in to Lenovo XClarity Controller web interface, and go to Utilization > Fan Speed (RPM) > Dust Filter Measurement to take the measurement by selecting Run immediately (once), or by setting a regular schedule.

Note
When taking the measurement, the fans will operate at full fan speed for about 30 seconds.
Figure 1. Dust filter measurement

Figure 2. Dust filter measurement settings

After taking the measurement, see Lenovo XClarity Controller Event Log for the status of dust filter. For proper operation, replace the dust filter according to the action suggestions in the generated event.

Figure 3. Dust filter measurement events

Figure 4. Dust filter measurement events