Parts list
Identify each of the components that is available for your server with the parts list.
Go to Lenovo Data Center Support and navigate to the support page for your server.
Click .
Enter the serial number to view a listing of parts for your server.
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.
T1: Tier 1 customer replaceable unit (CRU). Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
F: Field replaceable unit (FRU). FRUs must be installed only by trained service technicians.
C: Consumable and Structural parts. Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
| Description | Type | Description | Type |
|---|---|---|---|
For more information about ordering parts:
| |||
| 1 Top cover | T1 | 31 Chassis | T1 |
| 2 1U processor heat sink | F | 32 PCIe riser 2 cage | T2 |
| 3 2U processor heat sink | F | 33 PCIe riser 1 cage | T2 |
| 4 Air flow sensor board | F | 34 Low-profile filler | T1 |
| 5 Cable wall with heat sink detect switch | F | 35 PCIe riser 2 extender | T2 |
| 6 System board | F | 36 PCIe riser 1 extender | T2 |
| 7 M.2 backplane tray | T2 | 37 Front I/O fillers | T1 |
| 8 M.2 backplane | T2 | 38 CMOS battery | C |
| 9 M.2 drive | T1 | 39 MicroSD card | T1 |
| 10 Firmware and RoT security module | F | 40 Riser card for PCIe riser 2 | T2 |
| 11 RAID flash power module (supercap) | F | 41 Riser card for PCIe riser 1 | T2 |
| 12 RAID flash power module holder | T1 | 42 PCIe adapter | F |
| 13 M.2 air baffle, rear | T2 | 43 Security EIA bracket, right | T2 |
| 14 M.2 air baffle, front | T2 | 44 Security EIA bracket, left | T2 |
| 15 Internal drive cage | F | 45 Standard EIA bracket, right | T2 |
| 16 Power distribution board (PDB) | F | 46 Standard EIA bracket, left | T2 |
| 17 PDB cage | F | 47 Fan control board (FCB) | F |
| 18 Security bezel keylock bracket | T1 | 48 Fan cage | F |
| 19 Riser 2 blank filler | T2 | 49 Bezel detect switch with cable | F |
| 20 Security bezel | T1 | 50 Serial port module (COM port cable) | T2 |
| 21 Dust filter | T1 | 51 External diagnostic handset | T1 |
| 22 PSU filler | T1 | 52 Fan module | T1 |
| 23 Power supply unit | T1 | 53 Intrusion switch with cable | F |
| 24 2.5-inch drive filler | T1 | 54 Memory module | F |
| 25 2.5-inch drive | T1 | 55 Processor | F |
| 26 OCP 3.0 module | T1 | 56 Processor air baffle for 2U heat sink | T2 |
| 27 OCP filler | T1 | 57 Riser 2 filler for processor air baffle | T2 |
| 28 NVMe drive backplane | T2 | 58 Middle filler for processor air baffle | T1 |
| 29 SATA drive backplane | T2 | 59 Riser 1 filler for processor air baffle | T2 |
| 30 Backplane bracket | T1 | 60 Processor air baffle for 1U heat sink | T1 |