FQXSPPU0004M : [ProcessorElementName] has Failed with FRB1/BIST condition.
[ProcessorElementName] has Failed with FRB1/BIST condition.
This message is for the use case when an implementation has detected a Processor Failed - FRB1/BIST condition.
Critical - CPU
SNMP Trap ID
Automatically Notify Support
Complete the following steps:
- If the processor or firmware was just updated, check the Lenovo support site for an applicable service bulletin or firmware update that applies to this processor error.
- If there are multiple processors, swap processors to move affected processor to another processor socket and retry.
- If problem follows the affected processor, or this is a single processor system, replace the processor.
- Inspect the processor socket on each processor removal and replace system board first if the processor socket is damaged or mis-aligned pins are found.
- Replace the system board.