Skip to main content

Parts list

Use the parts list to identify each of the components that are available for your server.

For more information about ordering the parts shown in Figure 1:

Note
Depending on the model, your server might look slightly different from the illustration.
Figure 1. Server components
Server components
The parts listed in the following table are identified as one of the following:

  • Tier 1 customer replaceable unit (CRU): Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.

  • Tier 2 customer replaceable unit (CRU): You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.

  • Field replaceable unit (FRU): FRUs must be installed only by trained service technicians.

  • Consumable and Structural parts: Purchase and replacement of consumable and structural parts (components, such as a cover or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.

Table 1. Parts list
IndexDescriptionTier 1 CRUTier 2 CRUFRUConsumable and Structural part

It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.

1Top cover   √
2Heat sink  √ 
3Processor  √ 
4DIMM√   
5PCIe adapter√   
6PCIe riser assembly√   
7TPM card√   
8CMOS battery (CR2032)   √
9System board  √ 
10Power supply unit   √
11Chassis   √
12Air baffle   √
13Fan√   
14Front operator panel√   
153.5-inch simple-swap drive√   
162.5-inch simple-swap drive with 3.5-inch drive tray√   
17VGA cable√   
18Flash power module√   
19M.2 drive (42 mm and 80 mm)√   
20Two 3.5-inch drive backplate√   
21Four 3.5-inch drive backplate (connects to onboard connectors)√   
22Four 3.5-inch drive backplate (connects to RAID adapter)√