Backplate cables

Connect drive backplate cables to the corresponding connectors.

Two 3.5-inch drive backplate

Check System-board connectors for the detailed connectors location.

Figure 1. Two 3.5-inch drive backplate
Two 3.5-inch simple-swap drive backplate

Table 1. Two 3.5-inch drive backplate
`1` Backplate power connector

Figure 2. Four 3.5-inch drive backplate (connects to onboard connectors)

Table 2. Four 3.5-inch drive backplate (connects to onboard connectors)
`1` Backplate power connector

Table 3. Backplates for RAID x30 / x40 adapter
For RAID x30 adapter:	For RAID x40 adapter:

4 x 3.5'' simple-swap backplate, miniSAS HD to SAS	4 x 3.5'' simple-swap backplate, slimSAS HD to SAS

Figure 3. 3.5-inch simple-swap drive model with hardware RAID

Table 4. 3.5-inch simple-swap drive model with hardware RAID
`1` Backplane power connector

Give documentation feedback