Backplates and backplanes

Use this information to identify the backplate or the backplane you use.

Backplate, four 3.5-inch simple-swap drives (connects to onboard connectors)​

Figure 1. Backplate, four 3.5-inch simple-swap drives (connects to onboard connectors)

Backplate, four 3.5-inch simple-swap drives (connects to Gen 3 RAID adapter)​

Figure 2. Backplate, four 3.5-inch simple-swap drives (connects to Gen 3 RAID adapter)

Backplate, four 3.5-inch simple-swap drives (connects to Gen 4 RAID adapter)​

Figure 3. Backplate, four 3.5-inch simple-swap drives (connects to Gen 4 RAID adapter)

Backplate, two 3.5-inch simple-swap SATA drives and two NVMe drives (connects to onboard connectors)​

Figure 4. Backplate, two 3.5-inch simple-swap SATA drives and two NVMe drives (connects to onboard connectors)

Backplane, four 3.5-inch hot-swap drives​

Figure 5. Backplane, four 3.5-inch hot-swap drives

Backplane, eight 2.5-inch hot-swap drives​

Figure 6. Backplane, eight 2.5-inch hot-swap drives

Backplane, ten 2.5-inch hot-swap drives​

Figure 7. Backplane, ten 2.5-inch hot-swap drives