Server model with four 3.5-inch hot-swap drives
Use this section to understand the internal cable routing for the server model with four 3.5-inch hot-swap drives.
The following illustration shows the cable routing for the server model with four 3.5-inch hot-swap drives.
Figure 1. Cable routing for the server model with four 3.5-inch hot-swap drives
| Cable | From | To |
|---|---|---|
| 1 Power cable | Power connector on the backplane | Backplane power connector on the system board |
| 2 SAS signal cable | SAS 0 connector on the backplane | HBA/RAID adapter:
|
Give documentation feedback